// CODE SNIPPET
2610.1 Light-Transmitting Plastic Glazing of Skylight Assemblies
JUMP TO FULL CODE CHAPTER
Skylight assemblies glazed with light-transmitting plastic shall conform to the provisions of this section and Section 2606. Unit skylights glazed with light-transmitting plastic shall comply with Section 2405.5.
Exception: Skylights in which the light-transmitting plastic conforms to the required roof-covering class in accordance with Section 1505.
Related Code Sections
2610.1 Plastic, Light-Transmitting Plastic Glazing of Skylight Assemblies
Skylight assemblies glazed with light-transmitting plastic shall conform to the provisions of this section and Section 2606. Unit skylights glazed ...
Building Code 2018 of Illinois > 26 Plastic > 2610 Light-Transmitting Plastic Skylight Glazing > 2610.1 Light-Transmitting Plastic Glazing of Skylight Assemblies
2610.2 Plastic, Mounting
of construction classification, but not less than 4 inches (102 mm) above the plane of the roof. Edges of the light-transmitting plastic skylights ...
Building Code 2018 of Illinois > 26 Plastic > 2610 Light-Transmitting Plastic Skylight Glazing > 2610.2 Mounting
2610.6 Plastic, Separation
Skylights shall be separated from each other by a distance of not less than 4 feet (1219 mm) measured in a horizontal plane. Exceptions ...
Building Code 2018 of Illinois > 26 Plastic > 2610 Light-Transmitting Plastic Skylight Glazing > 2610.6 Separation
2610.7 Plastic, Location
Where exterior wall openings are required to be protected in accordance with Section 705, a skylight shall not be installed within 6 feet (1829 mm ...
Building Code 2018 of Illinois > 26 Plastic > 2610 Light-Transmitting Plastic Skylight Glazing > 2610.7 Location
2405.2 Glass and Glazing, Allowable Glazing Materials and Limitations
-transmitting plastic materials meeting the requirements of Section 2607, heat-strengthened glass or fully tempered glass. For multiple-layer glazing ...
Building Code 2018 of Illinois > 24 Glass and Glazing > 2405 Sloped Glazing and Skylights > 2405.2 Allowable Glazing Materials and Limitations