// CODE SNIPPET
1926.700(b)(3) Lift Slab
JUMP TO FULL CODE CHAPTER
Lift slab means a method of concrete construction in which floor, and roof slabs are cast on or at ground level and, using jacks, lifted into position.
Related Code Sections
1926.700(b)(3) Concrete and Masonry Construction, Lift Slab
Lift slab means a method of concrete construction in which floor, and roof slabs are cast on or at ground level and, using jacks, lifted ...
OSHA 1926 Construction > Q Concrete and Masonry Construction > 1926.700 Scope, Application, and Definitions Applicable to This Subpart > 1926.700(b) Definitions Applicable to This Subpart > 1926.700(b)(3) Lift Slab
Appendix 1926.705 Concrete and Masonry Construction, Lift Slab Operations
operations unless an independent registered professional engineer, other than the engineer who designed and planned the lifting operation, has determined ...
OSHA 1926 Construction > Q Concrete and Masonry Construction > 1926.705 Requirements for Lift-Slab Operations > 1926.705 Lift Slab Operations
1926.705(i) Concrete and Masonry Construction,
If leveling is maintained by manual controls, such controls shall be located in a central location and attended by a competent person whole lifting ...
OSHA 1926 Construction > Q Concrete and Masonry Construction > 1926.705 Requirements for Lift-Slab Operations > 1926.705(i)
1926.705(k)(3) Concrete and Masonry Construction,
For the purpose of paragraph (k) of this section, a jacking operation begins when a slab or group of slabs is lifted and ends when such slabs ...
OSHA 1926 Construction > Q Concrete and Masonry Construction > 1926.705 Requirements for Lift-Slab Operations > 1926.705(k) > 1926.705(k)(3)
1926.705(p) Concrete and Masonry Construction,
Equipment shall be designed and installed so that the lifting rods cannot slip out of position or the employer shall institute other measures ...
OSHA 1926 Construction > Q Concrete and Masonry Construction > 1926.705 Requirements for Lift-Slab Operations > 1926.705(p)