// CODE SNIPPET
1910.262(h)(1)(iii) Lever Control
Go To Full Code Chapter
When slashers are operated by control levers, these levers shall be connected to a horizontal bar or treadle located not more than 69 inches above the floor to control the operation from any point.
Upcodes Diagrams
Related Code Sections
1910.262(h)(1)(iii) Special Industries, Lever Control
When slashers are operated by control levers, these levers shall be connected to a horizontal bar or treadle located not more than 69 inches above ...
1910.265(e)(6)(i)(d) Special Industries,
Levers or controls shall be so arranged or guarded as to reduce the possibility of accidental operation ...
1910.179(g)(3)(ii) Materials Handling and Storage,
Lever operated controllers shall be provided with a notch or latch which in the "off" position prevents the handle from being inadvertently moved ...
1910.263(j)(1)(vii)(c) Special Industries,
Mechanical control levers for starting and stopping both slicing machine conveyors and wrapping machines shall be extended or so located ...
1910.180(h)(3)(xix) Materials Handling and Storage,
While a winch head is being used, the operator shall be within convenient reach of the power unit control lever ...