// CODE SNIPPET
C 601.4.2 Length of Vertical Piping
JUMP TO FULL CODE CHAPTER
The length of a vertical piping from a fixture trap to a horizontal branch shall not be considered in computing the fixture's horizontal distance from the stack.
Related Code Sections
C 601.4.2 Alternate Plumbing Systems, Length of Vertical Piping
The length of a vertical piping from a fixture trap to a horizontal branch shall not be considered in computing the fixture's horizontal distance ...
2021 Oregon Plumbing Specialty Code > C Alternate Plumbing Systems > C 601.0 Single-Stack Vent System > C 601.4 Length of Horizontal Branches > C 601.4.2 Length of Vertical Piping
908.1 Vents, Vertical Wet Venting
Wet venting is limited to vertical drainage piping receiving the discharge from the trap arm of one and two fixture unit fixtures that also serves ...
703.0 Sanitary Drainage, Size of Drainage Piping
, and additionally, in the case of vertical drainage pipes, in accordance with their length ...
P3111.2 Vents, Installation
and vent pipe. The length of the vertical pipe shall be not greater than 8 feet (2438 mm ...
2021 Oregon Residential Specialty Code (ORSC) > 31 Vents > P3111 Combination Waste and Vent System > P3111.2 Installation
7.4.6 Service Water Heating, Heat Traps
Vertical pipe risers serving storage water heaters and storage tanks not having integral heat traps and serving a nonrecirculating system shall have ...
2021 Oregon Energy Efficiency Specialty Code (OEESC) > 7 Service Water Heating > 7.4 Mandatory Provisions > 7.4.6 Heat Traps