// CODE SNIPPET

1318.10.2 Length of Testing

2018 Uniform Plumbing Code of Nevada > 13 Health Care Facilities and Medical Gas and Medical Vacuum Systems > 1318.0 Testing and Inspection > 1318.10 Standing Pressure Tests — Medical Vacuum Piping Systems > 1318.10.2 Length of Testing

JUMP TO FULL CODE CHAPTER

The piping systems shall be subjected to a 24 hour standing vacuum test. [NFPA 99:5.1.12.2.7.2]

Related Code Sections

1318.10.2 Health Care Facilities and Medical Gas and Medical Vacuum Systems, Length of Testing

The piping systems shall be subjected to a 24 hour standing vacuum test. [NFPA 99:5.1.12.2.7.2] ...

10.10.2.2.6* Underground Requirements, Hydrostatic Testing Allowance

allowance (makeup water) [gph (gal/hr)] S = length of pipe tested (ft) D = nominal diameter of the pipe (in.) P = average ...

Standard for the Installation of Sprinkler Systems 2016 of Nevada > 10 Underground Requirements > 10.10 Testing and Acceptance > 10.10.2 Acceptance Requirements > 10.10.2.2 Hydrostatic Test > 10.10.2.2.6* Hydrostatic Testing Allowance

14.4.4.3.3 Inspection, Testing, and Maintenance,

(or 4 percent obscuration light gray smoke, if not marked), the length of time between calibration tests shall be permitted to be extended ...

National Fire Alarm and Signaling Code 2016 of Nevada > 14 Inspection, Testing, and Maintenance > 14.4 Testing > 14.4.4* Testing Frequency > 14.4.4.3* > 14.4.4.3.3

1810.3.3.1.2 Soils and Foundations, Load Tests

concrete or by driving a precast base, control test elements shall be tested in accordance with ASTM D1143 or ASTM D4945. One element or more shall be load ...

Building Code 2018 of Nevada > 18 Soils and Foundations > 1810 Deep Foundations > 1810.3 Design and Detailing > 1810.3.3 Determination of Allowable Loads > 1810.3.3.1 Allowable Axial Load > 1810.3.3.1.2 Load Tests

1810.3.3.1.2 Soils and Foundations, Load Tests

concrete or by driving a precast base, control test elements shall be tested in accordance with ASTM D 1143 or ASTM D 4945. At least one element shall ...

Building Code 2012 of Nevada > 18 Soils and Foundations > 1810 Deep Foundations > 1810.3 Design and Detailing > 1810.3.3 Determination of Allowable Loads > 1810.3.3.1 Allowable Axial Load > 1810.3.3.1.2 Load Tests