// CODE SNIPPET
P2720.3 Leak Testing
JUMP TO FULL CODE CHAPTER
Leak testing and pump operation shall be performed in accordance with the manufacturer's instructions.
Related Code Sections
P2720.3 Plumbing Fixtures, Leak Testing
Leak testing and pump operation shall be performed in accordance with the manufacturer's instructions ...
Residential Code 2018 of Kansas > 27 Plumbing Fixtures > P2720 Whirlpool Bathtubs > P2720.3 Leak Testing
705.3.1 Gaseous Hydrogen Systems, Hydrostatic Leak Tests
The hydrostatic test pressure shall be not less than one-and-one-half times the maximum working pressure, and not less than 100 psig (689.5 kPa gauge) ...
Fuel Gas Code 2018 of Kansas > 7 Gaseous Hydrogen Systems > 705 (IFGC) Testing of Hydrogen Piping Systems > 705.3 Pressure Tests > 705.3.1 Hydrostatic Leak Tests
3505.8 Welding and Other Hot Work, Tests
Tests for leaks in piping systems and equipment shall be made with soapy water. The use of flames shall be prohibited for leak testing ...
Fire Code 2018 of Kansas > 35 Welding and Other Hot Work > 3505 Gas Welding and Cutting > 3505.8 Tests
603.8.2 Duct Systems, Sealing
Ducts shall be sealed, secured and tested prior to concrete encasement or direct burial. Ducts shall be leak tested as required by Section C403 ...
Mechanical Code 2018 of Kansas > 6 Duct Systems > 603 Duct Construction and Installation > 603.8 Underground Ducts > 603.8.2 Sealing
513.10.2 Exhaust Systems, Ducts
in accordance with Section 513.10.1. Ducts shall be constructed and supported in accordance with Chapter 6. Ducts shall be leak tested to 1.5 times the maximum ...
Mechanical Code 2018 of Kansas > 5 Exhaust Systems > 513 Smoke Control Systems > 513.10 Equipment > 513.10.2 Ducts