• Codes
  • Features
  • Pricing
  • Login
  • Sign Up
Sign Up
Login
  • Code Library
  • Features
  • Pricing
  • About
  • Careers
  • Contact
  • Terms
  • Privacy
Sign Up
Upgrade to premium.
Simplify code analysis.


START 2 WEEK FREE TRIAL LEARN ABOUT PREMIUM
// CODE SNIPPET

1314.5.2 Leak Check

Los Angeles Mechanical Code > 13 Fuel Gas Piping > 1314.0 Pressure Testing and Inspection > 1314.5 Piping System Leak Test > 1314.5.2 Leak Check
JUMP TO FULL CODE CHAPTER
Immediately after the gas is turned on into a new system or into a system that has been initially restored after an interruption of service, the piping system shall be checked for leakage. Where leakage is indicated, the gas supply shall be shut off until the necessary repairs have been made. [NFPA 54:8.2.3]
Share URL

Copy and paste the link below into emails, chats or browsers.

Copy

You can also copy or bookmark the link from your browser's address bar.
Share URL

Copy and paste the link below into emails, chats or browsers.

Copy

You can also copy or bookmark the link from your browser's address bar.


Copy Section Text

Copy with citation
P Premium Feature

This feature is included in premium subscriptions only. Click below to start a free trial.

Start Free Trial

Related Code Sections


1314.5.2 Fuel Gas Piping, Leak Check
, the piping system shall be checked for leakage. Where leakage is indicated, the gas supply shall be shut off until the necessary repairs have been made. [NFPA ...
Los Angeles Mechanical Code > 13 Fuel Gas Piping > 1314.0 Pressure Testing and Inspection > 1314.5 Piping System Leak Test > 1314.5.2 Leak Check
5.508.2.5.2 Nonresidential Mandatory Measures, Leaks
Check the system for leaks, repair any leaks, and retest for pressure using the same gauge ...
Los Angeles Green Building Code > 5 Nonresidential Mandatory Measures > 5.508 Outdoor Air Quality > 5.508.2 Supermarket refrigerant leak reduction > 5.508.2.5 Pressure testing > 5.508.2.5.2 Leaks
2305.2.5 Motor Fuel-Dispensing Facilities and Repair Garages, Leak detectors
Leak detection devices required by Section 2306.7.7.1 shall be checked and tested not less than annually in accordance with the manufacturer’s ...
Los Angeles Fire Code > 23 Motor Fuel-Dispensing Facilities and Repair Garages > 2305 Operational Requirements > 2305.2 Equipment maintenance and inspection > 2305.2.5 Leak detectors
1314.5.3 Fuel Gas Piping, Placing Appliances and Equipment in Operation
Appliances and equipment shall not be placed in operation until after the piping system has been checked in accordance with Section 1314.5.2 ...
Los Angeles Mechanical Code > 13 Fuel Gas Piping > 1314.0 Pressure Testing and Inspection > 1314.5 Piping System Leak Test > 1314.5.3 Placing Appliances and Equipment in Operation
1314.4.1 Fuel Gas Piping, Detecting Leaks
The leakage shall be located by means of an approved gas detector, a noncorrosive leak detection fluid, or other approved leak detection methods ...
Los Angeles Mechanical Code > 13 Fuel Gas Piping > 1314.0 Pressure Testing and Inspection > 1314.4 Detection of Leaks and Defects > 1314.4.1 Detecting Leaks
Calculate Code Requirements

Code Calculators automatically generate a detailed list of requirements.

Upgrade to premium to access these features.


LEARN MORE
About UpCodes

UpCodes provides an intuitive resource to navigate building regulations.

Codes are organized by jurisdiction to help you understand which regulations apply to your project.


Find Your Codes
Contact Us Privacy Terms