// CODE SNIPPET
1101.4.3 Leaders
Related Code Sections
1101.4.3 Storm Drainage, Leaders
Leaders installed outside shall comply with the applicable standards referenced in Table 701.2 for aboveground drain, waste, and vent pipe; aluminum ...
2018 Uniform Plumbing Code of Nevada > 11 Storm Drainage > 1101.0 General > 1101.4 Material Uses > 1101.4.3 Leaders
1103.1 Storm Drainage, Vertical Conductors and Leaders
Vertical conductors and leaders shall be sized by the maximum projected roof area and Table 1103.1.
TABLE 1103.1 SIZING ROOF DRAINS, LEADERS, AND ...
2018 Uniform Plumbing Code of Nevada > 11 Storm Drainage > 1103.0 Size of Leaders, Conductors, and Storm Drains > 1103.1 Vertical Conductors and Leaders
K 106.6 Potable Rainwater Catchment Systems, Drains, Conductors, and Leaders
The design and size of rainwater drains, conductors, and leaders shall comply with this code ...
2018 Uniform Plumbing Code of Nevada > K Potable Rainwater Catchment Systems > K 106.0 Water Quality Devices and Equipment > K 106.6 Drains, Conductors, and Leaders
1101.16.2 Storm Drainage, Combining Storm With Sanitary Drainage
The sanitary and storm drainage system of a building shall be entirely separate, except where a combined sewer is used, in which case the building ...
2018 Uniform Plumbing Code of Nevada > 11 Storm Drainage > 1101.0 General > 1101.16 Leaders, Conductors, and Connections > 1101.16.2 Combining Storm With Sanitary Drainage
1101.15.1 Storm Drainage, Where Not Required
No trap shall be required for leaders or conductors that are connected to a sewer carrying storm water exclusively ...
2018 Uniform Plumbing Code of Nevada > 11 Storm Drainage > 1101.0 General > 1101.15 Traps on Storm Drains and Leaders > 1101.15.1 Where Not Required