UpCodes logo
Go To Full Code Chapter
If exposed to contact with electric light or power conductors, the metal sheath of aerial cables entering buildings shall be grounded or shall be interrupted close to the entrance to the building by an insulating joint or equivalent device. Where protective devices are used, they shall be grounded.

Related Code Sections

1926.408(c)(5)(i) Electrical, Lead-in Conductors
If exposed to contact with electric light or power conductors, the metal sheath of aerial cables entering buildings shall be grounded or shall ...
1926.451(f)(17)(iv) Scaffolds,
In addition to a work lead attachment required by the welding process, a grounding conductor shall be connected from the scaffold to the structure ...
1926.451(f)(17) Scaffolds,
; In addition to a work lead attachment required by the welding process, a grounding conductor shall ...
1926.408(c)(3)(iii) Electrical, Inside of Buildings
Indoor antennas, lead-ins, and other communication conductors attached as open conductors to the inside of buildings shall be located at least 2 ...
1926.408(c)(2)(ii) Electrical, Antenna Lead-Ins
Each conductor of a lead-in from an outdoor antenna shall be provided with an antenna discharge unit or other means that will drain static charges ...