// CODE SNIPPET
Section 418 Laundry Trays
JUMP TO FULL CODE CHAPTER
Laundry trays shall conform to ASME A112.19.1/CSA B45.2, ASME A112.19.2/CSA B45.1, ASME A112.19.3/CSA B45.4 or CSA B45.5/IAPMO Z124.
Related Code Sections
Section 418 Fixtures, Faucets and Fixture Fittings, Laundry Trays
Laundry trays shall conform to ASME A112.19.1/CSA B45.2, ASME A112.19.2/CSA B45.1, ASME A112.19.3/CSA B45.4 or CSA B45.5/IAPMO Z124 ...
802.4.3.1 Indirect/Special Waste, Connection of Laundry Tray to Standpipe
As an alternative for a laundry tray fixture connecting directly to a drainage system, a laundry tray waste line without a fixture trap shall connect ...
Plumbing Code 2018 of Kansas > 8 Indirect/Special Waste > 802 Indirect Wastes > 802.4 Waste Receptors > 802.4.3 Standpipes > 802.4.3.1 Connection of Laundry Tray to Standpipe
P2706.1.2.1 Plumbing Fixtures, Laundry Tray Connection to Standpipe
Where a laundry tray waste line connects into a standpipe for an automatic clothes washer drain, the standpipe shall extend not less than 30 inches ...
Residential Code 2018 of Kansas > 27 Plumbing Fixtures > P2706 Waste Receptors > P2706.1 General > P2706.1.2 Standpipes > P2706.1.2.1 Laundry Tray Connection to Standpipe
802.4 Indirect/Special Waste, Waste Receptors
for rodding. As an alternative for a laundry tray ...
Plumbing Code 2018 of Kansas > 8 Indirect/Special Waste > 802 Indirect Wastes > 802.4 Waste Receptors
P2706.1 Plumbing Fixtures, General
Where a laundry tray waste line connects into a standpipe for an automatic clothes washer drain, the standpipe ...