// CODE SNIPPET
R703.7.1 Lath
JUMP TO FULL CODE CHAPTER
Lath and lath attachments shall be of corrosion-resistant materials. Expanded metal or woven wire lath shall be attached with 11/2-inch-long (38 mm), 11-gage nails having a 7/16-inch (11.1 mm) head, or 7/8-inch-long (22.2 mm), 16-gage staples, spaced not more than 6 inches (152 mm) or as otherwise approved.
Exception: Lath is not required over masonry, cast-in-place concrete, precast concrete or stone substrates prepared in accordance with ASTM C1063.
Related Code Sections
1404.10.1.4.1 Exterior Walls, Lathing
Lathing shall comply with the requirements of Section 2510 ...
Building Code 2018 of Kansas > 14 Exterior Walls > 1404 Installation of Wall Coverings > 1404.10 Adhered Masonry Veneer > 1404.10.1 Exterior Adhered Masonry Veneer > 1404.10.1.4 Adhered Masonry Veneer Installed With Lath and Mortar > 1404.10.1.4.1 Lathing
R703.7.1 Wall Covering, Lath
Lath and lath attachments shall be of corrosion-resistant materials. Expanded metal or woven wire lath shall be attached with 1 1 / 2 -inch-long (38 ...
Residential Code 2018 of Kansas > 7 Wall Covering > R703 Exterior Covering > R703.7 Exterior Plaster (Stucco) > R703.7.1 Lath
Section 2507 Gypsum Board, Gypsum Panel Products and Plaster, Lathing and Plastering
Lathing and plastering materials and accessories shall be marked by the manufacturer's designation to indicate compliance with the appropriate ...
Building Code 2018 of Kansas > 25 Gypsum Board, Gypsum Panel Products and Plaster > 2507 Lathing and Plastering
2510.5.1 Gypsum Board, Gypsum Panel Products and Plaster, Support of Lath
Where lath on vertical surfaces extends between rafters or other similar projecting members, solid backing shall be installed to provide support ...
Building Code 2018 of Kansas > 25 Gypsum Board, Gypsum Panel Products and Plaster > 2510 Lathing and Furring for Cement Plaster (Stucco) > 2510.5 Backing > 2510.5.1 Support of Lath
109.3.5 Scope and Administration, Lath or Gypsum Board Inspection
Lath and gypsum board inspections shall be made after lathing and gypsum board, interior and exterior, is in place but before any plastering ...
Existing Building Code 2018 of Kansas > 1 Scope and Administration > 109 Inspections > 109.3 Required Inspections > 109.3.5 Lath or Gypsum Board Inspection