// CODE SNIPPET
107-482 Landscaped Buffer for Manufacturing Development Adjacent to Residences
JUMP TO FULL CODE CHAPTER
Where an existing residential use is located adjacent to a proposed manufacturing or commercial development, the developer shall plant along that part of the side or rear lot line adjacent to a residential use, a row of evergreen shrubs at least four feet high at the time of planting and which are of a type which may be expected to form a year-round dense screen at least six feet high within three years, or trees selected from Appendix B and spaced at 10 feet on center. Such screening shall be maintained in good condition at all times.
Related Code Sections
Article 14 Elevators [PDF] (page 14)
(13.2.1.2.6-13.2.1.1.5). §C26-859.0 Strength of Hoistway Enclosure.-The hoistway enclosure adjacent to a landing opening shall be of sufficient ...
G301.1 Flood-Resistant Construction, All Developments
To the extent required by Section G102.1, all developments, including but not limited to utility installation, site improvements, placement ...
G301.1 Flood-Resistant Construction, All Developments
To the extent required by Section G102.1, all developments, including but not limited to utility installation, site improvements ...
Article 14 Elevators [PDF] (page 32)
laboratory designated by the board. Approved buffers shall be marked by the manufacturer with the range of speed and load for which such buffers have ...
Article 14 Elevators [PDF] (page 16)
2. Item 'd' may be omitted if provision is made to eliminate the jump of the car at counterweight buffer engagement. 3. It shall be unlawful ...