// CODE SNIPPET
1910.68(b)(6)(iv) Landing Surface
Go To Full Code Chapter
The landing surfaces at the entrances and exits to the manlift shall be constructed and maintained as to provide safe footing at all times.
Related Code Sections
1910.68(b)(6)(iv) Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms, Landing Surface
The landing surfaces at the entrances and exits to the manlift shall be constructed and maintained as to provide safe footing at all times ...
1910.23(c)(11) Walking-Working Surfaces,
Portable ladders used to gain access to an upper landing surface have side rails that extend at least 3 feet (0.9 m) above the upper landing surface ...
1910.66(f)(5)(ii)(J) Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms,
Access to and egress from a working platfrom, except for those that land directly on a safe surface, shall be provided by stairs, ladders, platforms ...
OSHA 1910 General Industry > F Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms > 1910.66 Powered Platforms for Building Maintenance > 1910.66(f) Powered Platform Installations-Equipment > 1910.66(f)(5) Suspended Equipment > 1910.66(f)(5)(ii) Two and Four-Point Suspended Working Platforms > 1910.66(f)(5)(ii)(J)
1910.29(g) Walking-Working Surfaces, Cages, Wells, and Platforms Used With Fixed Ladders
of a fall, and to direct them to a lower landing ...
1910.68(b)(10)(iii) Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms, Mounting Platform
A mounting platform shall be provided in front or to one side of the uprun at the lowest landing, unless the floor level is such that the following ...