// CODE SNIPPET
M1306.2.1 Labeled Assemblies
JUMP TO FULL CODE CHAPTER
The allowable clearance shall be based on an approved reduced clearance protective assembly that is listed and labeled in accordance with UL 1618.
Related Code Sections
308.4.1 General Regulations, Labeled Assemblies
The allowable clearance reduction shall be based on an approved reduced clearance protective assembly that is listed and labeled in accordance ...
Mechanical Code 2015 of Utah > 3 General Regulations > 308 Clearance Reduction > 308.4 Allowable Reduction > 308.4.1 Labeled Assemblies
308.4.1 General Regulations, Labeled Assemblies
The allowable clearance reduction shall be based on an approved reduced clearance protective assembly that is listed and labeled in accordance ...
Mechanical Code 2018 of Utah > 3 General Regulations > 308 Clearance Reduction > 308.4 Allowable Reduction > 308.4.1 Labeled Assemblies
M1306.2.1 General Mechanical System Requirements, Labeled Assemblies
The allowable clearance shall be based on an approved reduced clearance protective assembly that is listed and labeled in accordance with UL 1618 ...
Residential Code 2015 of Utah > 13 General Mechanical System Requirements > M1306 Clearances From Combustible Construction > M1306.2 Clearance Reduction > M1306.2.1 Labeled Assemblies
716.2.9 Fire and Smoke Protection Features, Labeled Protective Assemblies
Fire door assemblies shall be labeled by an approved agency . The labels shall comply with NFPA 80, and shall be permanently affixed to the door ...
Building Code 2018 of Utah > 7 Fire and Smoke Protection Features > 716 Opening Protectives > 716.2 Fire Door Assemblies > 716.2.9 Labeled Protective Assemblies
716.5.7 Fire and Smoke Protection Features, Labeled Protective Assemblies
Fire door assemblies shall be labeled by an approved agency . The labels shall comply with NFPA 80, and shall be permanently affixed to the door ...
Building Code 2015 of Utah > 7 Fire and Smoke Protection Features > 716 Opening Protectives > 716.5 Fire Door and Shutter Assemblies > 716.5.7 Labeled Protective Assemblies