// CODE SNIPPET
2603.5.6 Label Required
JUMP TO FULL CODE CHAPTER
The edge or face of each piece, package or container of foam plastic insulation shall bear the label of an approved agency. The label shall contain the manufacturer's or distributor's identification, model number, serial number or definitive information describing the product or materials' performance characteristics and approved agency's identification.
Related Code Sections
1507.8.9 Roof Assemblies and Rooftop Structures, Label Required
Each bundle of shingles shall be identified by a label of an approved grading or inspection bureau or agency ...
Building Code 2018 of Illinois > 15 Roof Assemblies and Rooftop Structures > 1507 Requirements for Roof Coverings > 1507.8 Wood Shingles > 1507.8.9 Label Required
2603.5.6 Plastic, Label Required
The edge or face of each piece, package or container of foam plastic insulation shall bear the label of an approved agency . The label shall ...
Building Code 2018 of Illinois > 26 Plastic > 2603 Foam Plastic Insulation > 2603.5 Exterior Walls of Buildings of Any Height > 2603.5.6 Label Required
716.3.5.2 Fire and Smoke Protection Features, Labeling Requirements
Fire-protection-rated glazing shall bear a label or other identification showing the name of the manufacturer, the test standard and information ...
Building Code 2018 of Illinois > 7 Fire and Smoke Protection Features > 716 Opening Protectives > 716.3 Fire Window Assemblies > 716.3.5 Labeled Protective Assemblies > 716.3.5.2 Labeling Requirements
(3) Special Equipment, Marking and Labeling Required
SOURCE by means of permanently affixed labels or other approved permanent marking: Exposed raceways, cable trays, and other wiring methods ...
National Electrical Code 2017 of Illinois > 6 Special Equipment > 690 Solar Photovoltaic (PV) Systems > 690.31 Methods Permitted > (G) Photovoltaic System Direct Current Circuits on or in a Building > (3) Marking and Labeling Required
6.4.1 Heating, Ventilating, and Air Conditioning, Equipment Efficiencies, Verification, and Labeling Requirements
with the specified test procedure. Where multiple rating conditions or performance requirements are provided, the equipment shall satisfy all ...
Energy Standard for Buildings Except Low-Rise Residential Buildings 2016 of Illinois > 6 Heating, Ventilating, and Air Conditioning > 6.4 Mandatory Provisions > 6.4.1 Equipment Efficiencies, Verification, and Labeling Requirements