// CODE SNIPPET
804.3 Kitchen Work Surface
JUMP TO FULL CODE CHAPTER
A clear floor space complying with 305 positioned for a forward approach shall be provided. The clear floor or ground space shall be centered on the kitchen work surface and shall provide knee and toe clearance complying with 306.
EXCEPTION: Cabinetry shall be permitted under the kitchen work surface provided that all of the following conditions are met:
- the cabinetry can be removed without removal or replacement of the kitchen work surface;
- the finish floor extends under the cabinetry; and
- the walls behind and surrounding the cabinetry are finished.
The kitchen work surface shall be 34 inches (865 mm) maximum above the finish floor or ground.
EXCEPTION: A counter that is adjustable to provide a kitchen work surface at variable heights, 29 inches (735 mm) minimum and 36 inches (915 mm) maximum, shall be permitted.
There shall be no sharp or abrasive surfaces under the work surface counters.
Related Code Sections
804.3 Special Rooms, Spaces, and Elements, Kitchen Work Surface
surface and shall provide knee and toe clearance complying with 306. EXCEPTION : Cabinetry shall be permitted under the kitchen work surface ...
2010 ADA Standards > 8 Special Rooms, Spaces, and Elements > 804 Kitchens and Kitchenettes > 804.3 Kitchen Work Surface
233.3.5 Scoping Requirements, Dispersion
that comply with section 809.2.2 of the 2010 Standards and kitchen work surfaces that comply with section 804.3 of the 2010 Standards. Multi-bedroom ...
2010 ADA Standards > 2 Scoping Requirements > 233 Residential Facilities > 233.3 Residential Dwelling Units Provided by Entities Not Subject to HUD Section 504 Regulations > 233.3.5 Dispersion
809.2.2 Special Rooms, Spaces, and Elements, Turning Space
clearances to provide wheelchair turning space. For example, in kitchens, 804.3.1 requires at least one work surface with clear floor space ...
2010 ADA Standards > 8 Special Rooms, Spaces, and Elements > 809 Residential Dwelling Units > 809.2 Accessible Routes > 809.2.2 Turning Space
224.5 Scoping Requirements, Dispersion
provide turning spaces that comply with section 809.2.2 of the 2010 Standards and kitchen work surfaces that comply with section 804.3 of the 2010 ...
226 Scoping Requirements, Dining Surfaces and Work Surfaces
surfaces shall comply with 902. In addition, where work surfaces are provided for use by other than employees, at least 5 percent shall comply with 902 ...