// CODE SNIPPET
R903.2.2 Kick-Out Flashing/Diverter
JUMP TO FULL CODE CHAPTER
A kick-out flashing shall be installed where the lower portion of a sloped roof steps within the plane of an intersecting wall cladding, in such a manner as to divert or kick out water away from the assembly.
Related Code Sections
R903.2.2 Roof Assemblies, Kick-Out Flashing/Diverter
A kick-out flashing shall be installed where the lower portion of a sloped roof steps within the plane of an intersecting wall cladding ...
Minnesota Residential Code 2015 > 9 Roof Assemblies > R903 Weather Protection > R903.2 Flashing > R903.2.2 Kick-Out Flashing/Diverter
R903.2 Roof Assemblies, Flashing
or direction and around roof openings. A flashing shall be installed to divert the water away from where the eave of a sloped roof intersects ...
R905.4.6 Roof Assemblies, Flashing
R905.10.3(1). The valley flashing shall extend not less than 8 inches (203 mm) from the centerline each way and shall have a splash diverter rib not less ...
2020 Minnesota Residential Code > 9 Roof Assemblies > R905 Requirements for Roof Coverings > R905.4 Metal Roof Shingles > R905.4.6 Flashing
R905.4.6 Roof Assemblies, Flashing
R905.10.3(1). The valley flashing shall extend at least 8 inches (203 mm) from the centerline each way and shall have a splash diverter rib not less than ...
Minnesota Residential Code 2015 > 9 Roof Assemblies > R905 Requirements for Roof Coverings > R905.4 Metal Roof Shingles > R905.4.6 Flashing
1507.5.7 Roof Assemblies and Rooftop Structures, Flashing
1507.4.3(1). The valley flashing shall extend at least 8 inches (203 mm) from the centerline each way and shall have a splash diverter rib not less than ...
Minnesota Building Code 2015 > 15 Roof Assemblies and Rooftop Structures > 1507 Requirements for Roof Coverings > 1507.5 Metal Roof Shingles > 1507.5.7 Flashing