// CODE SNIPPET
2906.5 Kettle Controls
JUMP TO FULL CODE CHAPTER
The kettle and thin-down tank shall be instrumented, controlled and interlocked so that any failure of the controls will result in a safe condition. The kettle shall be provided with a pressure-rupture disc in addition to the primary vent. The vent piping from the rupture disc shall be of minimum length and shall discharge to an approved location. The thin-down tank shall be adequately vented. Thinning operations shall be provided with an adequate vapor removal system.
Related Code Sections
2906.5 Manufacture of Organic Coatings, Kettle Controls
The kettle and thin-down tank shall be instrumented, controlled and interlocked so that any failure of the controls will result in a safe condition ...
2020 Minnesota State Fire Code > 29 Manufacture of Organic Coatings > 2906 Process Mills and Kettles > 2906.5 Kettle Controls
2906.5 Manufacture of Organic Coatings, Kettle Controls
The kettle and thin-down tank shall be instrumented, controlled and interlocked so that any failure of the controls will result in a safe condition ...
Minnesota Fire Code 2015 > 29 Manufacture of Organic Coatings > 2906 Process Mills and Kettles > 2906.5 Kettle Controls
303.2 General Requirements, Location
and within a controlled area identified by the use of traffic cones, barriers or other approved means. Asphalt (tar) kettles and pots shall ...
303.2 General Requirements, Location
and within a controlled area identified by the use of traffic cones, barriers or other approved means. Asphalt (tar) kettles and pots shall ...
2906.3 Manufacture of Organic Coatings, Open Kettles
Open kettles shall be located in an outside area provided with a protective roof; in a separate structure of noncombustible construction ...
Minnesota Fire Code 2015 > 29 Manufacture of Organic Coatings > 2906 Process Mills and Kettles > 2906.3 Open Kettles