// CODE SNIPPET
Section 21.802 — Joint Preparation
JUMP TO FULL CODE CHAPTER
The old or deteriorated mortar joint shall be cut out, by means of a toothing chisel or nonimpact power tool, to a uniform depth of 3/4 inch (19 mm) until sound mortar is reached. Care shall be taken not to damage the brick edges. After cutting is complete, all loose material shall be removed with a brush, air or water stream.
Related Code Sections
Section 21.802 Referenced Standards, — Joint Preparation
The old or deteriorated mortar joint shall be cut out, by means of a toothing chisel or nonimpact power tool, to a uniform depth of 3 / 4 inch (19 ...
Los Angeles Existing Building Code > Standards Referenced Standards > 21-8 Pointing of Unreinforced Masonry Walls > 21.802 — Joint Preparation
A18.104.22.168 Guidelines for the Seismic Retrofit of Existing Buildings, Pointing
Deteriorated mortar joints in unreinforced masonry walls shall be pointed in accordance with the following requirements: Joint preparation. The ...
Los Angeles Existing Building Code > A Guidelines for the Seismic Retrofit of Existing Buildings > A106 Materials Requirements > A106.3 Existing Unreinforced Masonry > A106.3.3 Testing of Masonry > A22.214.171.124 Pointing
1126.96.36.199.2 Interior Environment, Food Preparation Areas
Floors in areas used for food preparation and assembly shall be water-resistant. Floor surfaces, including tile joints, shall be resistant to food ...
Los Angeles Building Code > 12 Interior Environment > 1224 [OSHPD 1] Hospitals > 1224.4 General Construction > 1224.4.11 Interior Finishes > 1188.8.131.52 Floor Finishes > 1184.108.40.206.2 Food Preparation Areas
1314.2 Fuel Gas Piping, Test Preparation
Test preparation shall comply with Section 1314.2.1 through Section 1314.2.6 ...
Los Angeles Mechanical Code > 13 Fuel Gas Piping > 1314.0 Pressure Testing and Inspection > 1314.2 Test Preparation