// CODE SNIPPET
1910.241(d)(1) Jack
JUMP TO FULL CODE CHAPTER
A jack is an appliance for lifting and lowering or moving horizontally a load by application of a pushing force.
NOTE: Jacks may be of the following types: Lever and ratchet, screw and hydraulic.
NOTE: Jacks may be of the following types: Lever and ratchet, screw and hydraulic.
Related Code Sections
1910.241(d)(1) Hand and Portable Powered Tools and Other Hand-Held Equipment, Jack
A jack is an appliance for lifting and lowering or moving horizontally a load by application of a pushing force.
NOTE: Jacks may ...
OSHA 1910 General Industry > P Hand and Portable Powered Tools and Other Hand-Held Equipment > 1910.241 Definitions > 1910.241(d) Jack Terms > 1910.241(d)(1) Jack
1910.244(a) Hand and Portable Powered Tools and Other Hand-Held Equipment, Jacks
The operator shall make sure that the jack used has a rating sufficient to lift and sustain the load ...
OSHA 1910 General Industry > P Hand and Portable Powered Tools and Other Hand-Held Equipment > 1910.244 Other Portable Tools and Equipment > 1910.244(a) Jacks
1910.261(e)(4) Special Industries, Runway to the Jack Ladder
The runway from the pond or unloading dock to the table shall be protected with standard handrails and toeboards. Inclined portions shall have cleats ...
OSHA 1910 General Industry > R Special Industries > 1910.261 Pulp, Paper, and Paperboard Mills > 1910.261(e) Preparing Pulpwood > 1910.261(e)(4) Runway to the Jack Ladder
1910.244(a)(2)(vi) Hand and Portable Powered Tools and Other Hand-Held Equipment,
Each jack shall be thoroughly inspected at times which depend upon the service conditions. Inspections shall be not less frequent than the following ...
OSHA 1910 General Industry > P Hand and Portable Powered Tools and Other Hand-Held Equipment > 1910.244 Other Portable Tools and Equipment > 1910.244(a) Jacks > 1910.244(a)(2) Operation and Maintenance > 1910.244(a)(2)(vi)
1910.244(a)(1) Hand and Portable Powered Tools and Other Hand-Held Equipment, Loading and Marking
The operator shall make sure that the jack used has a rating sufficient to lift and sustain the load ...
OSHA 1910 General Industry > P Hand and Portable Powered Tools and Other Hand-Held Equipment > 1910.244 Other Portable Tools and Equipment > 1910.244(a) Jacks > 1910.244(a)(1) Loading and Marking