// CODE SNIPPET
R802.1.1.1 [IRC R802.1.1] Blocking
JUMP TO FULL CODE CHAPTER
Blocking shall be a minimum of utility grade lumber.
Related Code Sections
R802.1.1.1 Roof-Ceiling Construction, [IRC R802.1.1] Blocking
Blocking shall be a minimum of utility grade lumber ...
2014 FBC - Residential, 5th edition > 8 Roof-Ceiling Construction > R802 Wood Roof Framing > R802.1 General Requirements > R802.1.1 [IRC R802.1] Identification > R802.1.1.1 [IRC R802.1.1] Blocking
R802.1.1 Roof-Ceiling Construction, Sawn Lumber
Approved end-jointed lumber identified by a grade mark conforming to Section R802.1.1 shall be permitted to be used interchangeably with solid-sawn ...
2017 FBC - Residential, 6th edition > 8 Roof-Ceiling Construction > R802 Wood Roof Framing > R802.1 General > R802.1.1 Sawn Lumber
R802.1.1 Roof-Ceiling Construction, Sawn Lumber
Approved end-jointed lumber identified by a grade mark conforming to Section R802.1.1 shall be permitted to be used interchangeably with solid-sawn ...
2020 FBC - Residential, 7th edition > 8 Roof-Ceiling Construction > R802 Wood Roof Framing > R802.1 General > R802.1.1 Sawn Lumber
R602.2.2 Wall Construction, [IRC 602.7.3] Nonbearing Walls
surface above is not more than 24 inches (610 mm). For such nonbearing headers, no cripples or blocking are required above the header. R602.2.2.1 [IRC ...
2014 FBC - Residential, 5th edition > 6 Wall Construction > R602 Wood Wall Framing > R602.2 General Requirements > R602.2.2 [IRC 602.7.3] Nonbearing Walls
R502.1.10.1 Floors, [IRC 502.11.1] Design
Wood trusses shall be designed in accordance with approved engineering practice. The design and manufacture of metal plate connected wood trusses ...
2014 FBC - Residential, 5th edition > 5 Floors > R502 Wood Floor Framing > R502.1 Identification > R502.1.10 [IRC 502.11] Wood Trusses > R502.1.10.1 [IRC 502.11.1] Design