// CODE SNIPPET
JUMP TO FULL CODE CHAPTER
Interpolation shall be permitted in calculating capacities for vent dimensions that fall between table entries. [NFPA 54:13.1.15]
Related Code Sections
803.1.15 Chimneys and Vents, Interpolation
Interpolation shall be permitted in calculating capacities for vent dimensions that fall between table entries. [NFPA 54:13.1.15] ...
Los Angeles Mechanical Code > 8 Chimneys and Vents > 803.0 Sizing of Category Venting Systems > 803.1 Single Appliance Vent Table 803.1.2(1) Through Table 803.1.2(6) > 803.1.15 Interpolation
3103F.6.5 [SLC] Marine Oil Terminals, Configuration Coefficient (CC)
may be interpolated between these values [3.19] ...
Los Angeles Building Code > 31F [SLC] Marine Oil Terminals > 3103F Structural Loading Criteria > 3103F.6 Berthing Loads > 3103F.6.5 Configuration Coefficient (CC)
2404.3.3 Glass and Glazing, Vertical Patterned Glass
with ASTM E1300. The value for patterned glass shall be based on the thinnest part of the glass. Interpolation between nonfactored load charts in ASTM ...
Los Angeles Building Code > 24 Glass and Glazing > 2404 Wind, Snow, Seismic and Dead Loads on Glass > 2404.3 Wired, Patterned and Sandblasted Glass > 2404.3.3 Vertical Patterned Glass
722.214.171.124.1 Fire and Smoke Protection Features, Ceramic Fiber Joint Protection
3 / 8 inch (9.5 mm) and 1 inch (25 mm), the thickness of ceramic fiber blanket is allowed to be determined by direct interpolation. Other tested ...
Los Angeles Building Code > 7 Fire and Smoke Protection Features > 722 Calculated Fire Resistance > 722.2 Concrete Assemblies > 722.2.1 Concrete Walls > 7126.96.36.199 Joints Between Precast Wall Panels > 7188.8.131.52.1 Ceramic Fiber Joint Protection
R301.2.1.3 Building Planning, Wind Speed Conversion
asd 85 89 93 101 108 116 124 132 139 147 155 For SI: 1 mile per hour = 0.447 m/s. Linear interpolation is permitted ...
Los Angeles Residential Code > 3 Building Planning > R301 Design Criteria > R301.2 Climatic and Geographic Design Criteria > R301.2.1 Wind Design Criteria > R301.2.1.3 Wind Speed Conversion