// CODE SNIPPET
[F] 806.8 Interior Floor-Wall Base
JUMP TO FULL CODE CHAPTER
Interior floor-wall base that is 6 inches (152 mm) or less in height shall be tested in accordance with Section 804.2 and shall be not less than Class II. Where a Class I floor finish is required, the floor-wall base shall be Class I.
Related Code Sections
806.8 Interior Finishes, Interior Floor-Wall Base
Interior floor-wall base that is 6 inches (152 mm) or less in height shall be tested in accordance with Section 804.2 and shall be not less than ...
Building Code 2018 of Illinois > 8 Interior Finishes > 806 Decorative Materials and Trim > 806.8 Interior Floor-Wall Base
Section 802 Interior Finishes, General
The provisions of Section 803 shall limit the allowable fire performance and smoke development of interior wall and ceiling finish materials based ...
1209.2.1 Interior Environment, Floors and Wall Bases
intersections of such floors with walls shall have a smooth, hard, nonabsorbent vertical base that extends upward onto the walls not less than 4 inches (102 mm) ...
Building Code 2018 of Illinois > 12 Interior Environment > 1209 Toilet and Bathroom Requirements > 1209.2 Finish Materials > 1209.2.1 Floors and Wall Bases
Section 1206 Interior Environment, Sound Transmission
This section shall apply to common interior walls, partitions and floor/ceiling assemblies between adjacent dwelling units and sleeping units ...
402.6.1 Special Detailed Requirements Based on Occupancy and Use, Interior Finish
Interior wall and ceiling finishes within the mall of a covered mall building and within the exits of covered or open mall buildings shall ...
Building Code 2018 of Illinois > 4 Special Detailed Requirements Based on Occupancy and Use > 402 Covered Mall and Open Mall Buildings > 402.6 Interior Finishes and Features > 402.6.1 Interior Finish