// CODE SNIPPET

607.5 Insulation of Piping

Plumbing Code 2015 of Utah > 6 Water Supply and Distribution > 607 Hot Water Supply System > 607.5 Insulation of Piping

JUMP TO FULL CODE CHAPTER

For other than Group R2, R3 and R4 occupancies that are three stories or less in height above grade plane, piping to the inlet of a water heater and piping conveying water heated by a water heater shall be insulated in accordance with Section C404.4 of the International Energy Conservationby a water heater shall be insulated in accordance with Section C404.4 of the International Energy Conservation Code. For Group R2, R3 and R4 occupancies that are three stories or less in height above grade plane, piping to the inlet of a water heater and piping conveying water heated by a water heater shall be insulated in accordance with Section R403.5.3 of the International Energy Conservation Code.

Related Code Sections

607.5 Water Supply and Distribution, Insulation of Piping

and piping conveying water heated by a water heater shall be insulated in accordance with Section C404.4 of the International Energy Conservation ...

Plumbing Code 2015 of Utah > 6 Water Supply and Distribution > 607 Hot Water Supply System > 607.5 Insulation of Piping

C404.4 [CE] Commercial Energy Efficiency, Insulation of piping

Piping from a water heater to the termination of the heated water fixture supply pipe shall be insulated in accordance with Table C403.11.3. On both ...

Commercial Energy Conservation Code 2018 of Utah > 4 [CE] Commercial Energy Efficiency > C404 Service Water Heating (Mandatory) > C404.4 Insulation of piping

C404.4 [CE] Commercial Energy Efficiency, Insulation of piping

Piping from a water heater to the termination of the heated water fixture supply pipe shall be insulated in accordance with Table C403.2.10. On both ...

Residential Energy Conservation Code 2018 of Utah > 4 [CE] Commercial Energy Efficiency > C404 Service Water Heating (Mandatory) > C404.4 Insulation of piping

M1412.3 Heating and Cooling Equipment and Appliances, Insulation of Piping

Refrigerant piping, brine piping and fittings within a building shall be insulated to prevent condensation from forming on piping ...

Residential Code 2015 of Utah > 14 Heating and Cooling Equipment and Appliances > M1412 Absorption Cooling Equipment > M1412.3 Insulation of Piping

M1411.6 Heating and Cooling Equipment and Appliances, Insulation of Refrigerant Piping

Piping and fittings for refrigerant vapor (suction) lines shall be insulated with insulation having a thermal resistivity of not less than R-4 ...

Residential Code 2015 of Utah > 14 Heating and Cooling Equipment and Appliances > M1411 Heating and Cooling Equipment > M1411.6 Insulation of Refrigerant Piping

About UpCodes

UpCodes provides an intuitive resource to navigate building regulations.

Codes are organized by jurisdiction to help you understand which regulations apply to your project.

Find Your Codes