// CODE SNIPPET
R702.3.4 Insulating Concrete Form Walls
JUMP TO FULL CODE CHAPTER
Foam plastics for insulating concrete form walls constructed in accordance with Sections R404.1.2 and R608 on the interior of habitable spaces shall be protected in accordance with Section R316.4. Use of adhesives in conjunction with mechanical fasteners is permitted. Adhesives used for interior and exterior finishes shall be compatible with the insulating form materials.
Related Code Sections
R702.3.4 Wall Covering, Insulating Concrete Form Walls
Foam plastics for insulating concrete form walls constructed in accordance with Sections R404.1.2 and R608 on the interior of habitable spaces ...
Residential Code 2018 of Kansas > 7 Wall Covering > R702 Interior Covering > R702.3 Gypsum Board and Gypsum Panel Products > R702.3.4 Insulating Concrete Form Walls
R301.3 Building Planning, Story Height
end walls. For insulating concrete form walls, the maximum story height shall not exceed 11 feet 7 inches (3531 mm) and the maximum unsupported wall ...
1903.4 Concrete, Flat Wall Insulating Concrete Form (ICF) Systems
Insulating concrete form material used for forming flat concrete walls shall conform to ASTM E2634 ...
Building Code 2018 of Kansas > 19 Concrete > 1903 Specifications for Tests and Materials > 1903.4 Flat Wall Insulating Concrete Form (ICF) Systems
R402.2.5 [RE] Residential Energy Efficiency, Mass Walls
, concrete, insulated concrete form, masonry cavity, brick but not brick veneer, adobe, compressed earth block, rammed earth, solid timber or solid logs. Any ...
Energy Conservation Code 2018 of Kansas > 4 [RE] Residential Energy Efficiency > R402 Building Thermal Envelope > R402.2 Specific Insulation Requirements (Prescriptive) > R402.2.5 Mass Walls
N1102.2.5 [RE] Energy Efficiency, (R402.2.5) Mass Walls
, insulated concrete form, masonry cavity, brick but not brick veneer, adobe, compressed earth block, rammed earth, solid timber or solid logs. Any ...
Residential Code 2018 of Kansas > 11 [RE] Energy Efficiency > N1102 (R402) Building Thermal Envelope > N1102.2 (R402.2) Specific Insulation Requirements (Prescriptive) > N1102.2.5 (R402.2.5) Mass Walls