UpCodes logo
Go To Full Code Chapter
All completed building maintenance equipment installations shall be inspected and tested in the field before being placed in initial service to determine that all parts of the installation conform to applicable requirements of this standard, and that all safety and operating equipment is functioning as required. A similar inspection and test shall be made following any major alteration to an existing installation. No hoist in an installation shall be subjected to a load in excess of 125 percent of its rated load.

Related Code Sections

1910.15(b)(1) Adoption and Extension of Established Federal Standards, Ship Repair
Means any repair of a vessel, including, but not restricted to, alterations, conversions, installations, cleaning, painting, and maintenance work; ...
1910.1096(f)(3)(iii) Toxic and Hazardous Substances,
Following significant alterations or revisions to the system, tests and checks similar to the initial installation tests shall be made ...
1910.334(a)(3)(ii) Electrical,
Attachment plugs and receptacles may not be connected or altered in a manner which would prevent proper continuity of the equipment grounding ...
1910.178(q)(6) Materials Handling and Storage,
Industrial trucks shall not be altered so that the relative positions of the various parts are different from what they were when originally received ...