// CODE SNIPPET
M1407.3 Installation With Heat Pumps and Air Conditioners
Related Code Sections
M1407.3 Heating and Cooling Equipment and Appliances, Installation With Heat Pumps and Air Conditioners
Duct heaters located within 4 feet (1219 mm) of a heat pump or air conditioner shall be listed and labeled for such installations. The heat pump ...
Residential Code 2018 of Kansas > 14 Heating and Cooling Equipment and Appliances > M1407 Duct Heaters > M1407.3 Installation With Heat Pumps and Air Conditioners
424.61 Equipment for General Use, Installation of Duct Heaters With Heat Pumps and Air Conditioners
and heat pump or air conditioner identified as suitable for such installation and so marked ...
National Electrical Code 2017 of Kansas > 4 Equipment for General Use > 424 Fixed Electric Space-Heating Equipment > 424.61 Installation of Duct Heaters With Heat Pumps and Air Conditioners
918.2 Specific Appliances, Fireplaces and Solid Fuel-Burning Equipment, Heat Pumps
Electric heat pumps shall be tested in accordance with UL 1995 ...
Mechanical Code 2018 of Kansas > 9 Specific Appliances, Fireplaces and Solid Fuel-Burning Equipment > 918 Forced-Air Warm-Air Furnaces > 918.2 Heat Pumps
1210.8.4 Hydronic Piping, Contact With Building Material
A ground-source heat pump ground-loop piping system shall not be in direct contact with building materials that cause the piping or fitting material ...
Mechanical Code 2018 of Kansas > 12 Hydronic Piping > 1210 Plastic Pipe Ground-Source Heat Pump Loop Systems > 1210.8 Installation > 1210.8.4 Contact With Building Material
C403.4.4 [CE] Commercial Energy Efficiency, Part-Load Controls
flow on heating-water systems, chilled-water systems and heat rejection loops serving water-cooled unitary air conditioners as follows: 3.1. Where ...
Energy Conservation Code 2018 of Kansas > 4 [CE] Commercial Energy Efficiency > C403 Building Mechanical Systems > C403.4 Heating and Cooling System Controls (Mandatory) > C403.4.4 Part-Load Controls