// CODE SNIPPET
1926.400(a) Installation Safety Requirements
Related Code Sections
1926.400(a) Electrical, Installation Safety Requirements
Installation safety requirements are contained in 1926.402 through 1926.408. Included in this category are electric equipment and installations used ...
OSHA 1926 Construction > K Electrical > 1926.400 Introduction > 1926.400(a) Installation Safety Requirements
1926.402(a) Electrical, Covered
Sections 1926.402 through 1926.408 contain installation safety requirements for electrical equipment and installations used to provide electric power ...
1926.756(e)(2) Steel Erection,
and the midpoint between the finished floor and the top cable to permit installation of perimeter safety cables required by § 1926.760(a)(2), except where ...
OSHA 1926 Construction > R Steel Erection > 1926.756 Beams and Columns > 1926.756(e) Perimeter Columns > 1926.756(e)(2)
1926.601(b)(9) Motor Vehicles, Mechanized Equipment, and Marine Operations,
Seat belts and anchorages meeting the requirements of 49 CFR Part 571 (Department of Transportation, Federal Motor Vehicle Safety Standards) shall ...
OSHA 1926 Construction > O Motor Vehicles, Mechanized Equipment, and Marine Operations > 1926.601 Motor Vehicles > 1926.601(b) General Requirements > 1926.601(b)(9)
1926.153(d) Fire Protection and Prevention, Safety Devices
be used where the arrangement of this valve is such that full required capacity flow through the safety relief device is always afforded ...
OSHA 1926 Construction > F Fire Protection and Prevention > 1926.153 Liquefied Petroleum Gas (LP-gas) > 1926.153(d) Safety Devices