// CODE SNIPPET
R329.6.1 Installation Prior to Closing
JUMP TO FULL CODE CHAPTER
Where the system is installed in a one- or two-family dwelling or townhouse unit that is owned by the builder and has yet to be sold, commissioning shall be conducted as outlined in Section R329.6, and the builder shall then transfer the required information in Section R329.6 to the homeowner when the property is transferred to the owner at the closing.
Related Code Sections
R329.6.1 Building Planning, Installation Prior to Closing
Where the system is installed in a one- or two-family dwelling or townhouse unit that is owned by the builder and has yet to be sold, commissioning ...
2018 Washington State Residential Code > 3 Building Planning > R329 Energy Storage Systems (ESS) > R329.6 Commissioning > R329.6.1 Installation Prior to Closing
1318.6 Health Care Facilities and Medical Gas and Medical Vacuum Systems, Initial Pressure Test — Category 3 Copper Piping Systems
valves station outlets and inlets.
Prior to the installation of components of the distribution piping system that would be damaged by the test ...
2018 Washington State Plumbing Code > 13 Health Care Facilities and Medical Gas and Medical Vacuum Systems > 1318.0 Testing and Inspection > 1318.6 Initial Pressure Test — Category 3 Copper Piping Systems
R402.4.1.2 [RE] Residential Energy Efficiency, Testing
be closed and sealed;
Heating and cooling systems, if installed at the time of the test, shall be turned off; and
Supply and return registers ...
2015 Washington State Energy Code > 4 [RE] Residential Energy Efficiency > R402 Building Thermal Envelope > R402.4 Air Leakage (Mandatory) > R402.4.1 Building Thermal Envelope > R402.4.1.2 Testing
406.1 Gas Piping Installations, General
Prior to acceptance and initial operation, all piping installations shall be visually inspected and pressure tested to determine that the materials ...
Fuel Gas Code 2018 of Washington > 4 Gas Piping Installations > 406 (IFGS) Inspection, Testing and Purging > 406.1 General
G2417.1 Fuel Gas, (406.1) General
Prior to acceptance and initial operation, all piping installations shall be visually inspected and pressure tested to determine that the materials ...
2018 Washington State Residential Code > 24 Fuel Gas > G2417 (406) Inspection, Testing and Purging > G2417.1 (406.1) General