// CODE SNIPPET
R322.2.2.1 Installation of Openings
JUMP TO FULL CODE CHAPTER
The walls of enclosed areas shall have openings installed such that:
- There shall be not less than two openings on different sides of each enclosed area; if a building has more than one enclosed area below the design flood elevation, each area shall have openings.
- The bottom of each opening shall be not more than 1 foot (305 mm) above the higher of the final interior grade or floor and the finished exterior grade immediately under each opening.
- Openings shall be permitted to be installed in doors and windows; doors and windows without installed openings do not meet the requirements of this section.
Related Code Sections
R322.2.2.1 Building Planning, Installation of Openings
The walls of enclosed areas shall have openings installed such that: There shall be not less than two openings on different sides of each enclosed ...
Los Angeles Residential Code > 3 Building Planning > R322 Flood-Resistant Construction > R322.2 Flood Hazard Areas (Including A Zones) > R322.2.2 Enclosed Area Below Design Flood Elevation > R322.2.2.1 Installation of Openings
R322.2.2.1 Building Planning, Installation of Openings
The walls of enclosed areas shall have openings installed such that: There shall be not less than two openings on different sides of each enclosed ...
Los Angeles Residential Code > 3 Building Planning > R322 Flood-Resistant Construction > R322.2 Flood Hazard Areas (Including A Zones) > R322.2.2 Enclosed Area Below Design Flood Elevation > R322.2.2.1 Installation of Openings
1607.13.5.2.1 Structural Design, Photovoltaic Panels Installed on Open Grid Roof Structures
Structures with open grid framing and without a roof deck or sheathing supporting photovoltaic panel systems shall be designed to support the uniform ...
Los Angeles Building Code > 16 Structural Design > 1607 Live Loads > 1607.13 Roof Loads > 1607.13.5 Photovoltaic Panel Systems > 1607.13.5.2 Photovoltaic Panels or Modules > 1607.13.5.2.1 Photovoltaic Panels Installed on Open Grid Roof Structures
923.2 Installation of Specific Appliances, Unlisted Units
Unlisted open-top broiler units shall
be installed in accordance with the manufacturer's installation
instructions but shall not be installed ...
Los Angeles Mechanical Code > 9 Installation of Specific Appliances > 923.0 Open-Top Broiler Units > 923.2 Unlisted Units
922.1 Installation of Specific Appliances, Listed Units
Listed open-top broiler units shall be
installed in accordance with the manufacturer's installation
instructions. [NFPA 54:10.18.1] ...
Los Angeles Mechanical Code > 9 Installation of Specific Appliances > 922.0 Open-Top Broiler Units > 922.1 Listed Units