// CODE SNIPPET
(F) Installation Instructions
JUMP TO FULL CODE CHAPTER
All signs, outline lighting, skeleton tubing systems, and retrofit kits shall be marked to indicate that field wiring and installation instructions are required.
Exception: Portable, cord-connected signs are not required to be marked.
Related Code Sections
(F) Special Equipment, Installation Instructions
All signs, outline lighting, skeleton tubing systems, and retrofit kits shall be marked to indicate that field wiring and installation instructions ...
National Electrical Code 2020 of Texas > 6 Special Equipment > 600 Electric Signs and Outline Lighting > 600.4 Markings > (F) Installation Instructions
704.13.2 Fire and Smoke Protection Features, Manufacturer's Installation Instructions
The application of SFRM shall be in accordance with the manufacturer's installation instructions. The instructions shall include, but are not limited ...
Building Code of the Texas Industrialized Housing and Buildings Program > 7 Fire and Smoke Protection Features > 704 Fire-Resistance Rating of Structural Members > 704.13 Sprayed Fire-Resistant Materials (SFRM) > 704.13.2 Manufacturer's Installation Instructions
R106.1.2 Scope and Administration, Manufacturer's Installation Instructions
Manufacturer's installation instructions, as required by this code, shall be available on the job site at the time of inspection ...
Residential Code for one- and two-family dwellings of the Texas Industrialized Housing and Buildings Program > 1 Scope and Administration > R106 Construction Documents > R106.1 Submittal Documents > R106.1.2 Manufacturer's Installation Instructions
504.8.4.2 Exhaust Systems, Manufacturer's Instructions
The maximum length of the exhaust duct shall be determined by the dryer manufacturer's installation instructions. The code official shall be provided ...
Mechanical Code of the Texas Industrialized Housing and Buildings Program > 5 Exhaust Systems > 504 Clothes Dryer Exhaust > 504.8 Domestic Clothes Dryer Ducts > 504.8.4 Duct Length > 504.8.4.2 Manufacturer's Instructions
614.8.4.2 Specific Appliances, Manufacturer's Instructions
The maximum length of the exhaust duct shall be determined by the dryer manufacturer's installation instructions. The code official shall be provided ...
Fuel Gas Code of the Texas Industrialized Housing and Buildings Program > 6 Specific Appliances > 614 (IFGC) Clothes Dryer Exhaust > 614.8 Domestic Clothes Dryer Exhaust Ducts > 614.8.4 Duct Length > 614.8.4.2 Manufacturer's Instructions