// CODE SNIPPET
E3908.20 Installation Equipment Bonding Jumper
JUMP TO FULL CODE CHAPTER
Bonding
jumpers or conductors and equipment bonding jumpers
shall be installed either inside or outside of a raceway or an
enclosure in accordance with Sections E3908.20.1 and
E3908.20.2. [250.102(E)]
Where
installed outside of a raceway or enclosure, the length of
the bonding jumper or conductor or equipment bonding
jumper shall not exceed 6 feet (1829 mm) and shall be
routed with the raceway or enclosure. [250.102(E)(2)]
Equipment bonding jumpers and supply-side bonding jumpers installed for bonding grounding electrodes and installed at outdoor pole locations for the purpose of bonding or grounding isolated sections of metal raceways or elbows installed in exposed risers of metal conduit or other metal raceway, shall not be limited in length and shall not be required to be routed with a raceway or enclosure. [250.102(E)(2) Exception]
Equipment bonding jumpers and supply-side bonding jumpers installed for bonding grounding electrodes and installed at outdoor pole locations for the purpose of bonding or grounding isolated sections of metal raceways or elbows installed in exposed risers of metal conduit or other metal raceway, shall not be limited in length and shall not be required to be routed with a raceway or enclosure. [250.102(E)(2) Exception]
Bonding jumpers or conductors and equipment bonding jumpers shall be installed in accordance with Section E3610.2. [250.102(E)(3)]
Related Code Sections
E3908.20 Power and Lighting Distribution, Installation Equipment Bonding Jumper
Bonding
jumpers or conductors and equipment bonding jumpers
shall be installed either inside or outside of a raceway or an
enclosure in accordance ...
2015 Michigan Residential Code > 39 Power and Lighting Distribution > E3908 Grounding > E3908.20 Installation Equipment Bonding Jumper
Section E3609 Services, Bonding
Equipment shall be bonded by
other listed devices, such as bonding-type locknuts, bushings
and bushings with bonding jumpers. [250.92(B ...
E3601.4 Services, Other Conductors in Raceway or Cable
electrode conductors and equipment
bonding jumpers or conductors.
Load management control conductors having overcurrent
protection.
...
2015 Michigan Residential Code > 36 Services > E3601 General Services > E3601.4 Other Conductors in Raceway or Cable
E3608.2 Services, Bonding Jumper
The bonding jumper(s) used to
connect the grounding electrodes together to form the
grounding electrode system shall be installed in accordance ...
2015 Michigan Residential Code > 36 Services > E3608 Grounding Electrode System > E3608.2 Bonding Jumper
E3610.3 Services, Raceways and Enclosures for Grounding Electrode Conductors
to the grounding electrode
or to the grounding electrode conductor. Bonding methods
in compliance with Section E3609.4 for installations at
service equipment ...
2015 Michigan Residential Code > 36 Services > E3610 Grounding Electrode Conductors > E3610.3 Raceways and Enclosures for Grounding Electrode Conductors