// CODE SNIPPET
[F] 916.11 Inspection, Testing and Sensor Calibration
JUMP TO FULL CODE CHAPTER
Gas detection systems and sensors shall be inspected, tested and calibrated in accordance with the International Fire Code.
Related Code Sections
916.11 Fire Protection and Life Safety Systems, Inspection, Testing and Sensor Calibration
Gas detection systems and sensors shall be inspected, tested and calibrated in accordance with the International Fire Code ...
Building Code 2018 of Illinois > 9 Fire Protection and Life Safety Systems > 916 Gas Detection Systems > 916.11 Inspection, Testing and Sensor Calibration
C408.3.1 [CE] Commercial Energy Efficiency, Functional Testing
Prior to passing final inspection, the registered design professional shall provide evidence that the lighting control systems have been tested ...
2018 Illinois Energy Conservation Code Standards for Privately Funded Commercial Facilities and Standards for Residential Buildings > 4 [CE] Commercial Energy Efficiency > C408 Maintenance Information and System Commissioning > C408.3 Functional Testing of Lighting Controls > C408.3.1 Functional Testing
9.4.3 Lighting, Functional Testing
Lighting control devices and control systems shall be tested to ensure that control hardware and software are calibrated, adjusted, programmed ...
Energy Standard for Buildings Except Low-Rise Residential Buildings 2016 of Illinois > 9 Lighting > 9.4 Mandatory Provisions > 9.4.3 Functional Testing
6.5.1.1.6 Heating, Ventilating, and Air Conditioning, Sensor Accuracy
Outdoor air , return air, mixed air, and supply air sensors shall be calibrated within the following accuracies: Dry-bulb and wet-bulb ...
Energy Standard for Buildings Except Low-Rise Residential Buildings 2016 of Illinois > 6 Heating, Ventilating, and Air Conditioning > 6.5 Prescriptive Path > 6.5.1 Economizers > 6.5.1.1 Air Economizers > 6.5.1.1.6 Sensor Accuracy
1703.1.2 Special Inspections and Tests, Equipment
An approved agency shall have adequate equipment to perform required tests. The equipment shall be periodically calibrated ...
Building Code 2018 of Illinois > 17 Special Inspections and Tests > 1703 Approvals > 1703.1 Approved Agency > 1703.1.2 Equipment