// CODE SNIPPET
508.3.5.2 Inner Shell
JUMP TO FULL CODE CHAPTER
Where the outer shell is welded, the inner shell shall be of greasetight construction. [NFPA 96:5.3.3]
Related Code Sections
508.3.5.2 Exhaust Systems, Inner Shell
Where the outer shell is welded, the inner shell shall be of greasetight construction. [NFPA 96:5.3.3] ...
2018 Uniform Mechanical Code of Nevada > 5 Exhaust Systems > 508.0 Type I Hoods > 508.3 Construction of Type I Hoods > 508.3.5 Exhaust Hood Assemblies With Integrated Supply-Air Plenums > 508.3.5.2 Inner Shell
(C) Wiring and Protection, Screw Shells
For devices with screw shells, the terminal for the grounded conductor shall be the one connected to the screw shell ...
National Electrical Code 2017 of Nevada > 2 Wiring and Protection > 200 Use and Identification of Grounded Conductors > 200.10 Identification of Terminals > (C) Screw Shells
(E) Wiring and Protection, Screw Shell
The screw shell of a plug-type fuseholder shall be connected to the load side of the circuit ...
National Electrical Code 2017 of Nevada > 2 Wiring and Protection > 240 Overcurrent Protection > 240.50 General > (E) Screw Shell
(C) Special Equipment, Screw Shell
Luminaires installed under this section shall not have an exposed lamp screw shell ...
National Electrical Code 2017 of Nevada > 6 Special Equipment > 647 Sensitive Electronic Equipment > 647.8 Lighting Equipment > (C) Screw Shell
(1) Special Equipment, Forming Shells
Forming shells shall be installed for the mounting of all wet-niche underwater luminaires and shall be equipped with provisions for conduit entries ...
National Electrical Code 2017 of Nevada > 6 Special Equipment > 680 Swimming Pools, Fountains, and Similar Installations > 680.23 Underwater Luminaires > (B) Wet-Niche Luminaires > (1) Forming Shells