// CODE SNIPPET
H 701.9 Inlet Fitting
JUMP TO FULL CODE CHAPTER
An approved vented inlet fitting shall be provided in the seepage pit so arranged as to prevent the inflow from damaging the sidewall.
Exception: Where using a one- or two-piece concrete slab cover inlet, fitting shall be permitted to be a one-fourth bend fitting discharging through an opening in the top of the slab cover. On multiple seepage pit installations, the outlet fittings shall comply with Section H 701.2 of this appendix.
Related Code Sections
704.1 Sanitary Drainage, Inlet Fittings
Drainage piping shall be provided with approved inlet fittings for fixture connections, correctly located according to the size and type of fixture ...
2018 Uniform Plumbing Code of Nevada > 7 Sanitary Drainage > 704.0 Fixture Connections (Drainage) > 704.1 Inlet Fittings
H 701.9 Private Sewage Disposal Systems, Inlet Fitting
An approved vented inlet fitting shall be provided in the seepage pit so arranged as to prevent the inflow from damaging the sidewall. Exception ...
2018 Uniform Plumbing Code of Nevada > H Private Sewage Disposal Systems > H 701.0 Seepage Pits > H 701.9 Inlet Fitting
E 301.4 Manufactured/Mobile Home Parks and Recreational Vehicle Parks, Drain Connector
the manufactured home and the lot drainage inlet. The fitting connected to the lot drainage inlet shall be a directional fitting to discharge the flow ...
2018 Uniform Plumbing Code of Nevada > E Manufactured/Mobile Home Parks and Recreational Vehicle Parks > E 301.0 Manufactured/Mobile Home Park Drainage System Construction > E 301.4 Drain Connector
H 501.6 Private Sewage Disposal Systems, Pipe Opening Sizes
The inlet and outlet pipe openings shall not be larger in size than the connecting sewer pipe. The vertical leg of round inlet and outlet fittings ...
2018 Uniform Plumbing Code of Nevada > H Private Sewage Disposal Systems > H 501.0 Septic Tank Construction > H 501.6 Pipe Opening Sizes
905.6 Vents, Common Vertical Pipe
Two fixtures shall be permitted to be served by a common vertical pipe where each such fixture wastes separately into an approved double fitting ...
2018 Uniform Plumbing Code of Nevada > 9 Vents > 905.0 Vent Pipe Grades and Connections > 905.6 Common Vertical Pipe