// CODE SNIPPET
P2910.9.5.1 Inlet Control Valve Alarm
JUMP TO FULL CODE CHAPTER
Makeup water systems shall be fitted with a warning mechanism that alerts the user to a failure of the inlet control valve to close correctly. The alarm shall activate before the water within the storage tank begins to discharge into the overflow system.
Related Code Sections
P2910.9.5.1 Water Supply and Distribution, Inlet Control Valve Alarm
Makeup water systems shall be fitted with a warning mechanism that alerts the user to a failure of the inlet control valve to close correctly. The ...
Residential Code 2018 of Kansas > 29 Water Supply and Distribution > P2910 Nonpotable Water Systems > P2910.9 Nonpotable Water Storage Tanks > P2910.9.5 Makeup Water > P2910.9.5.1 Inlet Control Valve Alarm
8.16.1 Installation Requirements, Valves
pipe sprinkler system; a control valve is not required on the system side of the check valve or the alarm check valve ...
Standard for the Installation of Sprinkler Systems 2016 of Kansas > 8 Installation Requirements > 8.16 Piping Installation > 8.16.1 Valves
8.17.1.4 Installation Requirements, Indicating Control Valves
Where a control valve is installed in the connection to pressure-type contactors or water motor-operated alarm devices, it shall be of the indicating ...
Standard for the Installation of Sprinkler Systems 2016 of Kansas > 8 Installation Requirements > 8.17 System Attachments > 8.17.1* Sprinkler Alarms/Waterflow Alarms > 8.17.1.4 Indicating Control Valves
2307.6.1 Motor Fuel-Dispensing Facilities and Repair Garages, Product Control Valves
in the event that the dispenser is displaced from its mounting. A manual shutoff valve and an excess flow-control check valve shall be located ...
Fire Code 2018 of Kansas > 23 Motor Fuel-Dispensing Facilities and Repair Garages > 2307 Liquefied Petroleum Gas Motor Fuel-Dispensing Facilities > 2307.6 Installation of LP-gas Dispensing Devices and Equipment > 2307.6.1 Product Control Valves
412.8.1 Gas Piping Installations, Product Control Valves
in the event that the dispenser is displaced from its mounting. A manual shutoff valve and an excess flow-control check valve shall be located ...
Fuel Gas Code 2018 of Kansas > 4 Gas Piping Installations > 412 (IFGC) Liquefied Petroleum Gas Motor Vehicle Fuel-Dispensing Facilities > 412.8 Installation of Dispensing Devices and Equipment > 412.8.1 Product Control Valves