// CODE SNIPPET
AE301.1 Initial Installation
JUMP TO FULL CODE CHAPTER
A manufactured home shall not
be installed on a foundation system, reinstalled or altered
without first obtaining a permit from the building official. A
separate permit shall be required for each manufactured home
installation. When approved by the building official, such
permit may include accessory buildings and structures, and
their building service equipment, when the accessory buildings
or structures will be constructed in conjunction with the
manufactured home installation.
Related Code Sections
AE301.1 Manufactured Housing Used as Dwellings, Initial Installation
A manufactured home shall not
be installed on a foundation system, reinstalled or altered
without first obtaining a permit from the building ...
2015 Michigan Residential Code > E Manufactured Housing Used as Dwellings > AE301 Permits > AE301.1 Initial Installation
Section AE507 Manufactured Housing Used as Dwellings, Occupancy, Fire Safety and Energy Conservation Standards
Alterations made to a manufactured home
subsequent to its initial installation shall conform to the occupancy,
fire safety and energy conservation ...
2015 Michigan Residential Code > E Manufactured Housing Used as Dwellings > AE507 Occupancy, Fire Safety and Energy Conservation Standards
N1101.12.1 [RE] Energy Efficiency, (R303.1.1) Building Thermal Envelope Insulation
installed in each element of the building thermal envelope .
For blown or sprayed insulation (fiberglass and cellulose),
the initial installed thickness ...
2015 Michigan Residential Code > 11 [RE] Energy Efficiency > N1101 General > N1101.12 (R303.1) Identification > N1101.12.1 (R303.1.1) Building Thermal Envelope Insulation
5.8.1.1 Building Envelope, Labeling of Building Envelope Insulation
for the installed insulation listing the type of insulation, the manufacturer, the rated R-value, and, where appropriate, the initial installed ...
Energy Standard for Buildings Except Low-Rise Residential Buildings 2013 of Michigan > 5 Building Envelope > 5.8 Product Information and Installation Requirements > 5.8.1 Insulation > 5.8.1.1 Labeling of Building Envelope Insulation
C303.1.1 [CE] General Requirements, Building Thermal Envelope Insulation
installed in each element of the building thermal envelope . For blown or sprayed insulation (fiberglass and cellulose), the initial installed thickness ...
2015 Michigan Energy Code > 3 [CE] General Requirements > C303 Materials, Systems and Equipment > C303.1 Identification > C303.1.1 Building Thermal Envelope Insulation