// CODE SNIPPET
§3005-06 Information Tags
JUMP TO FULL CODE CHAPTER
(a) Identification. Every amusement device must be identified by the name and address of the manufacturer, a trade or descriptive name of the device, and any Department issued amusement device identification number. Such identification information must be permanently attached to the device and placed in a visible location.
(b) Rating plates. A metal plate must be permanently attached to the amusement device in a location that is clearly visible to inspectors, owners, amusement park operators, and amusement device operators. If a metal plate is not possible, an identification tag, acceptable to the Department, may be substituted, but must still be in a visible location and permanently attached to the amusement device. The following information must be legibly written on the plate or identification tag:
(1) The name and address of the amusement device manufacturer;
(2) The trade or descriptive name of the amusement device;
(3) The maximum allowable and safe load and passenger capacity of the amusement device;
(4) The maximum allowable and safe speed of the amusement device; and
(5) Weather restrictions. Additional information may be requested by the Department prior to the issuance of a certificate of compliance. If an amusement device or its supporting structure is altered, or if there is a change to any of the rating plate information, the existing rating plate must be replaced with a new metal plate with the correct information.
(c) Certificate of compliance. Every amusement device must have its certificate of compliance displayed in a location on or near the control station of the device that is visible to the public.
Related Code Sections
2205.6.4.2 Steel, Tag Lines
While structural members or assemblies are being hoisted, tag lines shall be used to prevent uncontrolled movement ...
NYC Building Code 2008 > 22 Steel > 2205 Structural Steel > 2205.6 Fabrication, Erection and Quality Control > 2205.6.4 Structural Steel Erection > 2205.6.4.2 Tag Lines
3305.2.5 Safeguards During Construction or Demolition, Tag Lines
While structural members or assemblies are being hoisted, a tag line or tag lines shall be used, as needed, to prevent uncontrolled movement ...
NYC Building Code 2014 > 33 Safeguards During Construction or Demolition > 3305 Material Placement and Installation > 3305.2 Structural Steel Assembly > 3305.2.5 Tag Lines
804.3 Interior Finishes, Testing and Identification
Floor covering materials shall be tested by an approved agency in accordance with NFPA 253 and identified by a hang tag or other suitable method so ...
NYC Building Code 2008 > 8 Interior Finishes > 804 Interior Floor Finish > 804.3 Testing and Identification
804.3 Interior Finishes, Testing and Identification
by a hang tag or other suitable method so as to identify the manufacturer or supplier and style, and shall indicate the interior floor finish or floor ...
NYC Building Code 2014 > 8 Interior Finishes > 804 Interior Floor Finish > 804.3 Testing and Identification
608.8.1 Water Supply and Distribution, Information
also contain information addressing the nature of the hazard. Pipe identification shall be repeated at maximum intervals of 25 feet (7620 mm) and at each ...
NYC Plumbing Code 2008 > 6 Water Supply and Distribution > 608 Protection of Potable Water Supply > 608.8 Identification of Potable and Nonpotable Water > 608.8.1 Information