// CODE SNIPPET
105.4.2 Information on Design and Installation Documents
JUMP TO FULL CODE CHAPTER
Related Code Sections
1704.8.5 Structural Tests and Special Inspections, Helical Pile Foundations
Special inspections shall be performed continuously during installation of helical pile foundations. The information recorded shall include ...
NYC Building Code 2014 > 17 Structural Tests and Special Inspections > 1704 Special Inspections > 1704.8 Deep Foundation Elements > 1704.8.5 Helical Pile Foundations
2303.4.1 Wood, Truss Design Drawings
to installation. These construction documents shall include, at a minimum, the information specified below. Truss shop drawings shall be provided ...
NYC Building Code 2008 > 23 Wood > 2303 Minimum Standards and Quality > 2303.4 Trusses > 2303.4.1 Truss Design Drawings
Section 1603 Structural Design, Construction Documents
centers and offsets fully dimensioned. The design loads and other information pertinent to the structural design required by Sections 1603.1.1 through ...
1603.1.7 Structural Design, Geotechnical Information
The design load-bearing values of soils or rock under shallow foundations and/or the design load capacity of deep foundations shall be shown ...
NYC Building Code 2014 > 16 Structural Design > 1603 Construction Documents > 1603.1 General > 1603.1.7 Geotechnical Information
§28-104.7.11 Administration, Additional Information
In addition to the data and information specified in this code and the rules of the department, the commissioner is authorized to require ...
NYC General Admin. Provisions 2008 > 1 Administration > 104 Construction Documents > §28-104.7 Submittal of Construction Documents > §28-104.7.11 Additional Information