// CODE SNIPPET
E4203.1.5 Indoor Locations
Related Code Sections
303.5 General Regulations, Indoor Locations
Furnaces and boilers installed in closets and alcoves shall be listed for such installation ...
Fuel Gas Code 2018 of Kansas > 3 General Regulations > 303 (IFGC) Appliance Location > 303.5 Indoor Locations
303.5 General Regulations, Indoor Locations
Furnaces and boilers installed in closets and alcoves shall be listed for such installation ...
Mechanical Code 2018 of Kansas > 3 General Regulations > 303 Equipment and Appliance Location > 303.5 Indoor Locations
E4203.1.5 Swimming Pools, Indoor Locations
Receptacles shall be located not less than 6 feet (1829 mm) from the inside walls of indoor spas and hot tubs. A minimum of one 125-volt receptacle ...
Residential Code 2018 of Kansas > 42 Swimming Pools > E4203 Equipment Location and Clearances > E4203.1 Receptacle Outlets > E4203.1.5 Indoor Locations
(D) Wiring Methods and Materials, Indoor Wet Locations
In portions of dairy processing facilities, laundries, canneries, and other indoor wet locations, and in locations where walls are frequently washed ...
National Electrical Code 2017 of Kansas > 3 Wiring Methods and Materials > 300 General Requirements for Wiring Methods and Materials > 300.6 Protection Against Corrosion and Deterioration > (D) Indoor Wet Locations
5004.2.2.1 Hazardous Materials—General Provisions, Containment and Drainage Methods
: Liquid-tight sloped or recessed floors in indoor locations or similar areas in outdoor locations. Liquid-tight floors in indoor locations ...
Fire Code 2018 of Kansas > 50 Hazardous Materials—General Provisions > 5004 Storage > 5004.2 Spill Control and Secondary Containment for Liquid and Solid Hazardous Materials > 5004.2.2 Secondary Containment for Hazardous Material Liquids and Solids > 5004.2.2.1 Containment and Drainage Methods