// CODE SNIPPET
505.2.5 Indigenous Materials
JUMP TO FULL CODE CHAPTER
Indigenous materials or components shall be composed of resources that are recovered, harvested, extracted and manufactured within a 500 mile (800 km) radius of the building site. Where only a portion of a material or product is recovered, harvested, extracted and manufactured within 500 miles (800 km), only that portion shall be included. Where resources are transported by water or rail, the distance to the building site shall be determined by multiplying the distance that the resources are transported by water or rail by 0.25, and adding that number to the distance transported by means other than water or rail.
Related Code Sections
505.2.5 Material Resource Conservation and Efficiency, Indigenous Materials
Indigenous materials or components shall be composed of resources that are recovered, harvested, extracted and manufactured within a 500 mile (800 km ...
Green Construction Code 2012 of Maryland > 5 Material Resource Conservation and Efficiency > 505 Material Selection > 505.2 Material Selection > 505.2.5 Indigenous Materials
A105.3 Project Electives, Material Selection Project Electives
and structures shall contain used, recycled content, recyclable, bio-based and indigenous materials that comply with Sections 505.1 through 505.2.5 ...
Green Construction Code 2012 of Maryland > A Project Electives > A105 Material Resource Conservation and Efficiency > A105.3 Material Selection Project Electives
Section 1102 Storm Drainage, Materials
The materials and methods utilized for the construction and installation of storm drainage systems shall comply with this section and the applicable ...
1103.2 Storm Drainage, Material
Storm water traps shall be of the same material as the piping system to which they are attached ...
Section 1202 Hydronic Piping, Material
Piping material shall conform to the standards cited in this section. Exception: Embedded piping regulated by Section 1209 ...