// CODE SNIPPET
Section 907 Incinerators and Crematories
JUMP TO FULL CODE CHAPTER
Incinerators and crematories shall be listed and labeled in accordance with UL 791 and shall be installed in accordance with the manufacturer's instructions.
Related Code Sections
Section 907 Specific Appliances, Fireplaces and Solid Fuel-Burning Equipment, Incinerators and Crematories
Incinerators and crematories shall be listed and labeled in accordance with UL 791 and shall be installed in accordance with the manufacturer's ...
Mechanical Code 2018 of Maryland > 9 Specific Appliances, Fireplaces and Solid Fuel-Burning Equipment > 907 Incinerators and Crematories
10.10.8 General Safety Requirements, Incinerators and Fireplaces
Incinerators, outdoor fireplaces, permanent barbecues, and grills shall not be built, installed, or maintained without prior approval of the AHJ ...
State of Maryland Fire Prevention Code > 10 General Safety Requirements > 10.10 Open Flames, Candles, Open Fires, and Incinerators > 10.10.8 Incinerators and Fireplaces
713.13.5 Fire and Smoke Protection Features, Incinerator Room
Incinerator rooms shall comply with Table 509 ...
Building Code 2018 of Maryland > 7 Fire and Smoke Protection Features > 713 Shaft Enclosures > 713.13 Waste and Linen Chutes and Incinerator Rooms > 713.13.5 Incinerator Room
713.13.5 Fire and Smoke Protection Features, Incinerator Room
Incinerator rooms shall comply with Table 509 ...
Building Code 2015 of Maryland > 7 Fire and Smoke Protection Features > 713 Shaft Enclosures > 713.13 Waste and Linen Chutes and Incinerator Rooms > 713.13.5 Incinerator Room
1006.2.2.1 Means of Egress, Boiler, Incinerator and Furnace Rooms
Two exit access doorways are required in boiler, incinerator and furnace rooms where the area is over 500 square feet (46 m 2 ) and any fuel-fired ...
Building Code 2015 of Maryland > 10 Means of Egress > 1006 Number of Exits and Exit Access Doorways > 1006.2 Egress From Spaces > 1006.2.2 Egress Based on Use > 1006.2.2.1 Boiler, Incinerator and Furnace Rooms