// CODE SNIPPET
E3906.5 In Wall or Ceiling
JUMP TO FULL CODE CHAPTER
In walls or ceilings of concrete, tile or other noncombustible material, boxes employing a flush-type cover or faceplate shall be installed so that the front edge of the box, plaster ring, extension ring, or listed extender will not be set back from the finished surface more than 1/4 inch (6.4 mm). In walls and ceilings constructed of wood or other combustible material, boxes, plaster rings, extension rings and listed extenders shall be flush with the finished surface or project therefrom. (314.20)
Related Code Sections
E3906.5 Power and Lighting Distribution, In Wall or Ceiling
In walls or ceilings of concrete, tile or other noncombustible material, boxes employing a flush-type cover or faceplate shall be installed so ...
2015 Michigan Residential Code > 39 Power and Lighting Distribution > E3906 Installation of Boxes, Conduit Bodies and Fittings > E3906.5 In Wall or Ceiling
806.3 Interior Finishes, Combustible Decorative Materials
In other than Group 1-3, curtains, draperies, fabric hangings and similar combustible decorative materials suspended from walls or ceilings shall ...
2015 Michigan Building Code > 8 Interior Finishes > 806 Decorative Materials and Trim > 806.3 Combustible Decorative Materials
304.4 General Regulations, Openings for Pipes
In or on structures where openings have been made in walls, floors or ceilings for the passage of pipes, the annular space between the pipe ...
1012.3 Change of Occupancy, Interior Finish
In areas of the building undergoing the change of occupancy classification, the interior finish of walls and ceilings shall comply ...
2015 Michigan Rehabilitation Code > 10 Change of Occupancy > 1012 Change of Occupancy Classification > 1012.3 Interior Finish
R603.9.5.1 Wall Construction, Seismic Design Category C
In Seismic Design Category C, the length of structural sheathing for walls supporting one story , roof and ceiling shall be the greater ...
2015 Michigan Residential Code > 6 Wall Construction > R603 Cold-Formed Steel Wall Framing > R603.9 Structural Sheathing > R603.9.5 Structural Sheathing for Stone and Masonry Veneer > R603.9.5.1 Seismic Design Category C