// CODE SNIPPET
1807.5 In Situ Walls
JUMP TO FULL CODE CHAPTER
In situ walls (such as slurry walls, tangent pile walls, and secant pile walls) with joints sealed by grouting or other methods acceptable to the engineer shall not require waterproofing or dampproofing unless required by the engineer.
Related Code Sections
1807.5 Soils and Foundations, In-Situ Walls
Applied waterproofing or damp-proofing need not be applied to slurry walls, or walls constructed below the water table. In-situ walls shall ...
NYC Building Code 2008 > 18 Soils and Foundations > 1807 Dampproofing and Waterproofing > 1807.5 In-Situ Walls
1807.5 Soils and Foundations, In Situ Walls
In situ walls (such as slurry walls, tangent pile walls, and secant pile walls) with joints sealed by grouting or other methods acceptable ...
NYC Building Code 2014 > 18 Soils and Foundations > 1807 Dampproofing and Waterproofing > 1807.5 In Situ Walls
1604.6 Structural Design, In-Situ Load Tests
The commissioner is authorized to require an engineering analysis or a load test, or both, of any construction whenever ...
NYC Building Code 2008 > 16 Structural Design > 1604 General Design Requirements > 1604.6 In-Situ Load Tests
1604.6 Structural Design, In-Situ Load Tests
The commissioner is authorized to require an engineering analysis or a load test, or both, of any construction whenever there is reason to question ...
NYC Building Code 2014 > 16 Structural Design > 1604 General Design Requirements > 1604.6 In-Situ Load Tests
Section 1713 Structural Tests and Special Inspections, In-Situ Load Tests
In-situ load tests shall be conducted in accordance ...