// CODE SNIPPET
73-202 In M1-5A or M1-5B Districts
JUMP TO FULL CODE CHAPTER
In M1-5A or M1-5B Districts, the Board of Standards and Appeals may permit theaters for a term not to exceed five years, provided that the following findings are made:
(a) that such use will not impair the character or the future use or development of the surrounding residential or mixed use neighborhoods;
(b) that such use will not cause undue congestion in local streets; and
(c) that such use provides a waiting area of adequate size to prevent obstruction of street areas and other uses within the same or other building.
The Board shall prescribe appropriate controls to minimize adverse effects on the character of the surrounding area, including, but not limited to, location of entrances and operable windows; provision of sound-lock vestibules; specification of acoustical insulation; maximum size of establishment; number, kinds of amplification of musical instruments or voices; shielding of flood lights; adequate screening; curb cuts, or parking.
Related Code Sections
1615.1.3 Structural Design, Design Spectral Response Acceleration Parameters
(Equation 16-40)
where:
S D1 = (2/3) S M1 ...
NYC Building Code 2008 > 16 Structural Design > 1615 Earthquake Loads — Site Ground Motion > 1615.1 General Procedure for Determining Maximum Considered Earthquake and Design Spectral Response Accelerations > 1615.1.3 Design Spectral Response Acceleration Parameters
1613.5.4 Structural Design, Design Spectral Response Acceleration Parameters
as determined in Section 1613.5.3. S M1 = The MCE R spectral response accelerations for 1-second period as determined in Section 1613.5.3 ...
NYC Building Code 2014 > 16 Structural Design > 1613 Earthquake Loads > 1613.5 Seismic Ground Motion Values > 1613.5.4 Design Spectral Response Acceleration Parameters
Article 8 Materials, Loads and Stresses [PDF] (page 20)
to M 2 M Cb = 1.75 − 1.05 (M1 ) + 0.3 (M1 ) , but not more than 2.3 2 2 When the bending moment at any point within an unbraced length is larger ...
1620.4.5 Structural Design, Building Separations
on the same property shall be separated by at least δ MT where
δMT = √( δ M1 ) 2 + ( δ M2 ) 2 ...
NYC Building Code 2008 > 16 Structural Design > 1620 Earthquake Loads — Design, Detailing Requirements and Structural Component Load Effects > 1620.4 Seismic Design Category D > 1620.4.5 Building Separations
Article 8 Materials, Loads and Stresses [PDF] (page 21)
their supports in the plane of bending. M Cm = 0.6 + 0.4M1 , but not less than 0.4 2 where M1 / M2 is the ratio of the smaller to larger moments ...