// CODE SNIPPET
(3) In Hoistways
JUMP TO FULL CODE CHAPTER
Related Code Sections
(H) Special Conditions, In Hoistways
In hoistways, Class 2 or Class 3 circuit conductors shall be installed in rigid metal conduit, rigid nonmetallic conduit, intermediate metal conduit ...
National Electrical Code 2020 of Minnesota > 7 Special Conditions > 725 Class 1, Class 2, and Class 3 Remote- Control, Signaling, and Power-Limited Circuits > 725.136 Separation From Electric Light, Power, Class 1, Non- Power-Limited Fire Alarm Circuit Conductors, and Medium- Power Network-Powered Broadband Communications Cables > (H) In Hoistways
(3) Special Conditions, In Hoistways
installed in hoistways. Exception: As provided for in 620.21 for elevators and similar equipment ...
National Electrical Code 2020 of Minnesota > 7 Special Conditions > 760 Fire Alarm Systems > 760.130 Wiring Methods and Materials on Load Side of the PLFA Power Source > (B) PLFA Wiring Methods and Materials > (3) In Hoistways
322.12 Wiring Methods and Materials, Uses Not Permitted
Flat cable assemblies shall not be used as follows: Where exposed to corrosive conditions, unless suitable for the application In hoistways ...
National Electrical Code 2020 of Minnesota > 3 Wiring Methods and Materials > 322 Flat Cable Assemblies: Type FC > 322.12 Uses Not Permitted
360.12 Wiring Methods and Materials, Uses Not Permitted
FMT shall not be used as follows: In hoistways In storage battery rooms In hazardous (classified) locations unless otherwise permitted under ...
National Electrical Code 2020 of Minnesota > 3 Wiring Methods and Materials > 360 Flexible Metallic Tubing: Type FMT > 360.12 Uses Not Permitted
22.214.171.124 Electric Elevators,
In elevators provided with Firefighters' Emergency Operation, a drain or sump pump shall be provided. The sump pump/drain shall have the capacity ...
Safety Code for Elevators and Escalators 2016 of Minnesota > 2 Electric Elevators > 2.2 Pits > 2.2.2 Design and Construction of Pits > 126.96.36.199