// CODE SNIPPET
§403-01 Impact Resistant Stair and Elevator Shaft Enclosures. [Repealed]
JUMP TO FULL CODE CHAPTER
(Repealed eff. 1/4/2016)
Related Code Sections
Section 708 Fire and Smoke Protection Features, Shaft Enclosures
-resistant joint system in accordance with Section 714. A shaft enclosure shall not be required for floor openings created by unenclosed stairs or ramps ...
403.9.2 Special Detailed Requirements Based on Use and Occupancy, Impact Resistant Elevator Shafts
Elevator shafts shall be constructed of impact resistant walls. Minimum impact resistance standards shall be established by rules of the department ...
NYC Building Code 2008 > 4 Special Detailed Requirements Based on Use and Occupancy > 403 High-Rise Buildings > 403.9 Elevators > 403.9.2 Impact Resistant Elevator Shafts
§27-344 Fire Protection Construction Requirements, Shafts
, and elevator car enclosures as permitted under subchapter eighteen of this chapter. (c) Openings in shafts. All shaft openings below the top terminus ...
NYC 1968 Code (Vol I) > 5 Fire Protection Construction Requirements > 5 Prevention of Interior Fire Spread > §27-344 Shafts
Section 707 Fire-Resistance-Rated Construction, Shaft Enclosures
Shaft enclosures shall have a fire-resistance rating of not less than 2 hours where penetrating three stories or more and not less than 1 hour where ...
7188.8.131.52 Fire-Resistance-Rated Construction, Exit and Elevator Protectives
Approved fire-protection-rated glazing used in fire doors in elevator and stairway shaft enclosures shall be so located as to furnish clear vision ...
NYC Building Code 2008 > 7 Fire-Resistance-Rated Construction > 715 Opening Protectives > 715.3 Fire Door and Shutter Assemblies > 715.3.6 Glazing Material > 7184.108.40.206 Exit and Elevator Protectives