// CODE SNIPPET
42-533 Illuminated or Flashing Signs
JUMP TO FULL CODE CHAPTER
M1 M2 M3
In all districts, as indicated, illuminated or flashing advertising signs are not permitted.
Illuminated or flashing signs, other than advertising signs, and accessory or advertising signs with indirect illumination are permitted, provided that the total surface area of all such signs, in square feet, shall not exceed:
(a) for illuminated or flashing signs other than advertising signs, five times the street frontage of the zoning lot, in feet, and that the surface area of each sign shall not exceed 500 square feet; and
(b) for accessory or advertising signs with indirect illumination, five times the street frontage of the zoning lot, in feet, and that the surface area of each sign shall not exceed 750 square feet.
However, in any Manufacturing District in which residences or joint living-work quarters for artists are, under the provisions of the Zoning Resolution, allowed as-of-right or by special permit or authorization, the total surface area of all such permitted signs shall not exceed five times the street frontage of the zoning lot, in feet, and that the surface area of each sign shall not exceed 500 square feet.
Related Code Sections
H106.1 Outdoor Signs, Illumination
A sign shall not be illuminated by other than electrical means, and electrical devices and wiring shall be installed in accordance ...
H106.1 Outdoor Signs, Illumination
A sign shall not be illuminated by other than electrical means, and electrical devices and wiring shall be installed in accordance ...
H106.1 Outdoor Signs, Illumination
A sign shall not be illuminated by other than electrical means, and electrical devices and wiring shall be installed in accordance ...
§27-505 Special Uses and Occupancies, Illuminated Signs
with the following requirements: (1) ILLUMINATION. No sign shall be illuminated by other than electrical means. All wiring and accessory electrical ...
NYC 1968 Code (Vol I) > 7 Special Uses and Occupancies > 17 Outdoor Signs and Display Structures > §27-505 Illuminated Signs
1011.2 Means of Egress, Illumination
Exit signs shall be internally or externally illuminated. Exception: Tactile signs required by Section 1011.3 need not be provided ...