// CODE SNIPPET
G2427.4.1.1 (503.4.1.1) (IFGS) Plastic Vent Joints
Go To Full Code Chapter
Plastic pipe and fittings used to vent appliances shall be installed in accordance with the appliance manufacturer's instructions. Plastic pipe venting materials listed and labeled in accordance with UL 1738 shall be installed in accordance with the vent manufacturer's instructions. Where a primer is required, it shall be of a contrasting color.
Upcodes Diagrams
Related Code Sections
G2427.4.1.1 Fuel Gas, (503.4.1.1) (IFGS) Plastic Vent Joints
Plastic pipe and fittings used to vent appliances shall be installed in accordance with the appliance manufacturer's instructions. Plastic pipe ...
503.4.1.1 Chimneys and Vents, Plastic Vent Joints
Plastic pipe and fittings used to vent appliances shall be installed in accordance with the appliance manufacturer's instructions. Plastic pipe ...
Section 403 Gas Piping Installations, (IFGS) Piping Materials
Plastic pipe and fittings used to connect regulator vents to remote vent ...
405.3 Gas Piping Installations, Plastic Pipe
Plastic pipe bends shall comply with the following: The pipe shall not be damaged and the internal diameter of the pipe shall not be effectively ...
801.20 Chimneys and Vents, Plastic Vent Joints
Plastic pipe and fittings used to vent appliances shall be installed in accordance with the appliance manufacturer's installation instructions ...