UpCodes logo
Go To Full Code Chapter
Except as indicated in Section 2406.3.1, each pane of safety glazing installed in hazardous locations shall be identified by a manufacturer's designation specifying who applied the designation, the manufacturer or installer and the safety glazing standard with which it complies, as well as the information specified in Section 2403.1. The designation shall be acid etched, sand blasted, ceramic fired, laser etched, embossed or of a type that once applied, cannot be removed without being destroyed. A label meeting the requirements of this section shall be permitted in lieu of the manufacturer's designation.
Exceptions:
  1. For other than tempered glass, manufacturer's designations are not required, provided that the building official approves the use of a certificate, affidavit or other evidence confirming compliance with this code.
  2. Tempered spandrel glass is permitted to be identified by the manufacturer with a removable paper designation.
2406.3.1 Multipane Assemblies
Multipane glazed assemblies having individual panes not exceeding 1 square foot (0.09 m2) in exposed areas shall have one pane or more in the assembly marked as indicated in Section 2406.3. Other panes in the assembly shall be marked "CPSC 16 CFR Part 1201" or "ANSI Z97.1," as appropriate.

Related Code Sections

2406.3 Glass and Glazing, Identification of Safety Glazing
Except as indicated in Section 2406.3.1, each pane of safety glazing installed in hazardous locations shall be identified by a manufacturer's ...
2406.3 Glass and Glazing, Identification of Safety Glazing
Except as indicated in Section 2406.3.1, each pane of safety glazing installed in hazardous locations shall be identified by a manufacturer's ...
2403.1 Glass and Glazing, Identification
Each pane shall bear the manufacturer's mark designating the type and thickness of the glass or glazing material. The identification shall ...
2403.1 Glass and Glazing, Identification
Each pane shall bear the manufacturer's mark designating the type and thickness of the glass or glazing material. The identification shall ...
716.1.2 Fire and Smoke Protection Features, Glazing
and fire-resistance-rated glazing installed in fire door assemblies and fire window assemblies shall comply with the safety glazing requirements ...